Electrolux DS603 manual User maintenance instructions, Cleaning the outer surfaces

Page 28

User maintenance instructions

Cleaning the outer surfaces

From time to time the wash program indicator panel and its surrounds need to be cleaned to remove food particles, hard water scale and any spillages. We recommend wiping these areas with a clean damp cloth.

Important!

We do not recommend the use of the following cleaning aids on your DishDrawer® as they may damage the surfaces:

Plastic or stainless steel scouring pads

Abrasive, solvent, household cleaners

Acid or alkaline cleaners

Hand washing liquids or soap

Laundry detergents or disinfectants

For prefinished models

Depending on the type of exterior finish on your DishDrawer®, we recommend the following:

Stainless Steel

This surface requires only a mild dishwashing detergent and warm water. Take care not to wet the control panel.

Dry with a clean lint-free cloth

DO NOT use proprietary “Stainless Steel” type cleaners or polishes as these may damage the protective coating.

Important!

Never use abrasive cleaners or harsh solvents as these will damage the stainless steel surface.

White or Black

To clean the doors wipe the doors with a clean damp cloth.

Dry with a clean lint-free cloth.

For integrated models

Clean the integrated control badge with a damp cloth, then dry with a clean, lint-free cloth.

22

Image 28

Contents

Dishwasher User guide Page Installation checklist Important safety information Installation MaintenanceOperational Contents DishDrawer user guidePower button Delay StartStart/Pause button Lock button / optionalPower failure Wash program selectorEco button optional ChildlockLock Button optional LCD screen controls Prefinished models with LCDWash program progress symbols Operation Load DishesWash program chart Standard Wash Program when to useEco Wash Program when to use Pre washCaring for your dinnerware Vacation timeOption adjustment section Dishwasher standards testNormal Eco 5g pre wash per drawerAccessories How to install the Mega RackCup Racks Cutlery BasketHow to load your DishDrawer LoadingHow not to load your DishDrawer OvercrowdingDetergent dispenser Filling the detergent dispenserDetergent quantities Hard water situationsSoft water situations Water type Wash program Detergent quantitiesSetting up the water softener How to fill the salt reservoirDishDrawer setting Grains Per Gallon gpg 100 250 350 450 550Salt indicator light Salt Indicator Light Salt Reservoir CapSalt reservoir SelectedRinse agent indicator light Rinse agent dispenserFilling the rinse agent dispenser Fit the plug back into the original positionOption adjustments Setting Option Beeps option Clean Dish Mode option End of Wash Closed DryBelow User maintenance instructions Cleaning the outer surfacesFor prefinished models For integrated modelsCleaning the Drain Filter, Spray Arm and Filter Plate We recommend that the drain filter is cleanedCleaning the Drain Filter DishDrawerCleaning the Spray Arm & Filter plate Trouble shooting Problem Possible CauseProblem Possible Cause What to do Unclean dishesFoaming No detergentDispensed Excessive motorHow to Recognize a Fault Code Fault codesHow to Attend to a Fault Code Fault Codes Possible Causes What to Do Fill FaultHow long does this Limited Warranty last? Limited warrantyFisher & Paykel undertakes to This warranty does not cover How to get serviceCommercial use No other warrantiesPage Copyright Reserved Fisher & Paykel DishDrawer User Guide Published 08/2004 Part No B