Controls (Integrated badge and Prefinished models with no LCD)
If you have a double DishDrawer®, each drawer has its own controls and can run independently of the
other.
Power button 
The | button turns the DishDrawer® on or off. | Integrated badge | |
| |||
Opening the drawer will automatically turn the |
| ||
DishDrawer® on for 30 seconds. To end a wash |
| ||
program in mid cycle, press the | button. Any |
| |
water in the DishDrawer® will be pumped out.
Prefinished models with no LCD
Start/Pause button 
The 
button starts a wash program. Press the 
button to pause or restart the DishDrawer® during a wash program. When paused, wait for three beeps before opening the drawer. Forcing the drawer open while in mid cycle may cause damage or injury.
Delay Start
The 
button also sets the Delay Start feature which can delay the start of a wash program from 1 to 12 hours. This feature also satisfies Shabbat requirements if the Auto Power option is disabled (see Option Adjustment).
To activate Delay Start
1Press and hold the 
button until the light above the 
button turns orange (or purple depending on your model).
2Continue holding the 
button down until the desired delay time has been reached. The
DishDrawer® will emit audible ‘beeps’ as you hold the 
button down, each beep indicates another hour delay.
3The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay Start Press the 
button.
Lock button 
/
(optional)
The 
/
button activates/deactivates the Keylock or the Childlock functions.
Keylock
The Keylock feature disables all the buttons on the DishDrawer®.
To activate, press and hold the 
/
button until you hear one beep (3 seconds). The light above the 
/
button is lit when Keylock is activated.
To cancel the Keylock feature, press and hold the 
/
button until the light above the 
/
button disappears.
2