Fault Codes | Possible Causes | What to Do |
F1
F2
F3
F4
F9
U1
Flood switch has been | Turn the water and power supply to the |
activated. | DishDrawer® off and call your Authorized |
| Service Center. |
Motor problem. | Call your Authorized Service Center. |
Temperature sensor failed. Ensure water coming in through the inlet hose is not hotter than 65oC. You may need to install a tempering valve on your water supply.
Faulty temperature sensor | Call your Authorized Service Center. |
or element |
|
Electronics malfunction. | Call your Authorized Service Center. |
Fill Fault | 1 | Turn the DishDrawer® water supply on. |
| 2 | Ensure the spray arm can rotate about |
|
| the center, and if the DishDrawer® is |
|
| full of water, it will need to be emptied |
|
| manually. |
| 3 | Call your Authorized Service Center. |
29