Reversing the Door
4.Unscrew Phillips screw from the door bottom right and remove door fitting (1). Insert door fitting supplied in the door bottom left and fasten with Phillips screw (2). Carefully remove the door to the front and place on one side.
5.Move the upper hinge bracket pivot to the left.
6.Carefully slide the door onto the top hinge bracket pivot and close.
7.Place the lower door hinge bracket with the hinge bracket pivot in the lower left of the door and fasten.
8.Move the door handle from the left to the right, remove the hole cover pins (1) and cover the remaining holes with the hole cover pins attached (2).
9.Open the door and fit the plinth.
14 | 818 35 |