Maintenance and Cleaning
Replacing the Light Bulb
1 Warning! Danger of electrical shock! Before replacing the light bulb switch appliance off and remove the mains plug.
Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14
Important!
When replacing the lamp only fit a lamp of suitable diameter, that is at least 18 mm, this will ensure a good seat on the rubber seal.
Where to purchase: specialist retailer or AEG Service Force Centre.
01. To switch the appliance off press the ON/OFF button.
2.Unplug the mains plug.
3. To change the light bulb, undo the cross head screw and remove the light bulb cover downwards.
4. Change the defective light bulb.
5. Refit the light bulb cover and the cross head screw.
818 35 | 29 |