Electrolux SANTO 72340 KA operating instructions Initial Start-Up, Temperature Adjustment

Page 18

Initial Start-Up

01. Insert plug into mains socket.

2.Press ON/OFF button.

A warning tone sounds and the red warning light flashes indicating that the required storage temperature has not yet been reached. The compressor starts and then runs automatically.

3.Press the ALARM OFF button to switch off the warning tone.

4.Set temperature to +5 °C or colder (see section: "Temperature Adjust- ment").

3 Goods to be refrigerated can be loaded immediately after switching on, because the storage temperature in the refrigerator is quickly reached.

Temperature Adjustment

With the buttons for temperature adjustment the desired temperatures in the refrigerator can be adjusted.

01. Press either the „+“ (WARMER) or „-“ (COLDER) button.

The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

2.To adjust to a warmer temperature, press the „+“ (WARMER) button. To adjust to a colder temperature, press the „-“ (COLDER) button. The changed setting is immediately displayed on the temperature display.

Each time the button is pressed the temperature is adjusted by 1 °C. Adjustable temperature range: +2 °C to +8 °C, +15 °C (Holiday mode)

Note: From a food safety point of view, +5 °C for the refrigerator compartment should be considered cold enough as a storage temperature.

3 When the buttons are not further pressed after an adjustment has been made, after a short period (approx. 5 sec.) the temperature display swit- ches over and again displays the ACTUAL temperature in the refrigera- tor. The display changes from flashing to illuminated numbers.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place.

18

818 35 73-01/6

Image 18
Contents Santo 72340 KA Dear customer Contents Contents Installation Important Safety InstructionsPrior to Installation RefrigerantEnvironmental Information Appliance Transport Old applianceBefore Use PackagingInstallation Installation LocationRefrigerator needs Ventilation Appliance AlignmentElectrical Connection Installation of the carbon filter Reversing the Door Move the upper hinge bracket pivot to the left Description of the Appliance View of the applianceButtons for Adjusting the Temperature Control PanelTemperature Display Alarm OFF buttonPrior to Initial Start-Up Temperature Adjustment Initial Start-UpChilling of cans/bottles Coolmatic buttonQuick chill Chilling of foodTemperature warning Switching the Appliance offOpen Door Warning Holiday Mode Opening the DoorInterior Fittings Storage ShelvesSalad Bin Bottle Rack Quick Chill ShelfBottle and Can Holder Dismantling of the Bottle and Can Holder Variable Inner DoorBottle Holder Proper Storage Normal Operating Sounds Energy Saving AdviceHints and Tips Food StorageExternal Cleaning Maintenance and CleaningInternal Cleaning DefrostingChanging the carbon filter Light bulb specifications 220-240 V, max W, fitting E Replacing the Light BulbSymptom Solution What to do ifRegulations, Standards, Guidelines Evaporator Technical TerminologyRefrigerant Circuit CompressorGuarantee Conditions European Guarantee818 35 73-01/6 Service & Spare Parts 08705 929Customer Care Subject to change without notice