Electrolux SANTO 3350-7 KA manual Reversing the Door

Page 13

Reversing the Door

The door hinges can be changed from right (as supplied) to left if required to suit the location where the appliance is installed.

1 Warning! Unplug from the mains before reversing the door.

01. Open the door and remove the plinth cover to the front. Move the door bearing cover on the

plinth cover from the left to the right. Close the door.

2.With the door closed, remove the

cross-head screws from the lower door bearing and remove the door bearing downwards.

3. Remove the door fitting from the

door bearing (1, 2). Move the 1 bearing pivot from the right to

the left hand hole (3). Place the door fitting supplied on the bear- ing pivot (4, 5).

4

5

2

3

818 19 99-00/7

13

Image 13
Contents Santo 3350-7 KA High Street Dear customerSlough Berkshire SL 1 1DZContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Environmental Information When disposing of your old appliancePackaging Old AppliancesBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationRefrigerator needs Ventilation Please check whether, after installingAppliance Alignment Earth Electrical ConnectionReversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceControl Panel Buttons for Adjusting the TemperaturePrior to Initial Start-Up Temperature DisplayInitial Start-Up Fast Chill Temperature AdjustmentOpening the Door Switching the Appliance offStorage Shelves Interior FittingsSalad Bin Bottle Holder Variable Inner DoorProper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingReplacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee Conditions818 19 99-00/7 Calls may be recorded for training purposes Service & Spare PartsSubject to change without notice