Electrolux SANTO 3350-7 KA manual Remove the transport fittings from the storage shelves

Page 9

Before Use

2.Remove the transport protection pieces and pull off the adhesive tape.

3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Remove the transport fittings from the storage shelves:

4. Slide the fittings securing the shelf forward to the thicker section on the edge of the storage shelf.

5. Slide the storage shelf far enough forward so that it can be hinged downwards and the fittings can be removed from the guides.

818 19 99-00/7

9

Image 9
Contents Santo 3350-7 KA High Street Dear customerSlough Berkshire SL 1 1DZContents Something Not Working Prior to Installation Important Safety InstructionsChild Safety Environmental Information When disposing of your old appliancePackaging Old AppliancesBefore Use Appliance TransportRemove the transport fittings from the storage shelves Installation Location InstallationPlease check whether, after installing Refrigerator needs VentilationAppliance Alignment Earth Electrical ConnectionReversing the Door Move the upper bearing pivot to the left View of the appliance Description of the ApplianceControl Panel Buttons for Adjusting the TemperatureTemperature Display Prior to Initial Start-UpInitial Start-Up Fast Chill Temperature AdjustmentOpening the Door Switching the Appliance offInterior Fittings Storage ShelvesSalad Bin Bottle Holder Variable Inner DoorProper Storage Hints and Tips Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingReplacing the Light Bulb Light bulb specifications 220-240 V, max W, fitting ESomething Not Working Symptom SolutionRegulations, Standards, Guidelines Refrigerant Circuit Technical TerminologyEuropean Guarantee Guarantee Conditions818 19 99-00/7 Calls may be recorded for training purposes Service & Spare PartsSubject to change without notice