Symptom | Solution | |
Water on the floor | Water drain hole is blocked, | |
see "Maintenance and Cleaning". | ||
| ||
The compressor does not start | This is normal, the compressor starts after | |
immediately after changing the | ||
a period of time. | ||
temperature setting. | ||
| ||
|
|
If after the above checks there is still a fault, call your local AEG Service Force Centre.
Please note that proof of purchase is required for
Regulations, Standards, Guidelines
This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), accident prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.
The refrigerant circuit has been checked for leaks.
;This appliance is in accordance with the following EU guidelines:
–73/23/EWG dated 19 February 1973 - low voltage guidelines.
–89/336/EWG dated 3 May 1989
(including guideline change notice 92/31/EWG) - EMV guideline
818 19 | 27 |