Electrolux S 60170 TK3 operating instructions Energy Saving Tips

Page 19

Energy Saving Tips

Do not install the appliance near cookers, radiators or other sources of warmth. High ambient temperatures cause longer, more frequent operation of the compressor.

Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings.

Do not place warm foods into the appliance. Allow warm foods to cool first.

Only leave door open as long as necessary.

Do not set temperature any colder than necessary.

Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.

Always keep the heat emitting condenser, the metal grille on the rear wall of your appliance clean.

19

Image 19
Contents Santo Dear customer Contents Contents Refrigerant Important Safety InstructionsSafety of children Prior to initial start-upCase of malfunction Daily OperationDisposal of Old Appliances DisposalRemove Transport Packaging Appliance Packaging InformationInstallation Location InstallationClimate classification For an ambient temperature Should be checked before Ventilation grille is inserted InstallationYour Refrigerator Needs Air Detaching the WorktopLevelling Reversing the DoorInstallation Plug Socket Is no longer accessible afterThat indicated on the appliance rating Plate Electrical ConnectionDoor shelf Compressor View of the ApplianceThermostat Control Using the ApplianceBefore Use To Start the ApplianceInterior Accessories Switching Off the ApplianceStorage Shelves Hints for storage Internal Cleaning Cleaning and CareEnergy Saving Tips Correcting Malfunctions What to do ifWhat to do if Regulations, Standards, Guidelines Noises During OperationChanging the Light Bulb Compressor Technical TerminologyRefrigerant Circuit EvaporatorCustomer Care Department Service and Spare Parts0870 5 Guarantee Conditions AE/19 Page From the Electrolux Group. The world’s No.1 choice AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc