Description of the Appliance
•The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter.
•You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre).
Extractor version
•In this version fumes are extracted to the outside via a hose connected to the coupling ring. Fig. 1.
•In order to obtain the best performance the hose should have a diameter equal to the outlet hole.
Only for model DL 4150-CHDL 4150:
Should there already be an hose of diameter 100 mm that ducts to the outside through the walls or roof, it is possible to use the 120/ 100 mm adapter. In this case the hood will be slightly noisier.
Coupling ring
510
710
Bayonet screw fitting (Only 570 D - 5708 D)
Fig. 1
Filter Version
• The air is filtered through a charcoal filter and returned to the kitchen. Fig. 2.
• You will need an original AEG charcoal filter for the filtering function. (See Special Accessories).
Fig. 2
5