Charcoal filter
•The charcoal filter should only be used if you want to use the hood in the recirculation function.
•To do this you will need an original AEG charcoal filter (available from your local Service Force Centre).
•The charcoal filter cannot be washed nor regenerated.
The charcoal filter should be replaced every 12 months under normal use.
Replacement filters are available from your local Service Force Centre.
•Fitting
Remove the grease filter.
Fit the charcoal filter on the lamp side, press in both red lugs on the charcoal filter, and unclip the charcoal filter forwards (towards the front edge of the appliance).
Refit the grease filter.
•To remove proceed in the reverse order.
•Always specify the hood model code number and serial number when ordering replacement filters. This information is shown on the registration plate located on the inside of the unit.
•The charcoal filter can be ordered from your local AEG Service Force Centre.
Fig. 5
9