6Operating Instructions
To Select Normal Cycle
Press
or 
until “NORMAL”
is
displayed.
Press
“ Select Options”
or
until
desired cycle options are displayed. When desired
option text appears in the display press 
.
To continue selecting your desired cyle options
press the 
and press 
for each additional
cycle option that is desired. When all desired cycle
options have been selected press “Start”
and
close the door.
My Favorite
This cycle allows you to program your preferred cycle and options into one button. To program the Favorite Cycle: start by simply pressing the Set Icon until Welcome appears in the display, this will get you started in being able to select your cycle. After you have pressed the Set Icon arrow to Favorite cycle press the Set Icon again, this allows you to be able to make your selections. After you have chosen the cycles press the Select Options Icon, arrow through to select your options. All the options appear off until you press the set icon. When you have chosen your options press the Wash Cycle Icon, followed by Set then press Start, SAVED will appear in the display. Once, programmed, simply press the Favorite Icon followed by Start/Cancel to have your Favorite Cycle begin.
Heavy Wash
For pots, pans, casseroles and dinnerware with
WASH CYCLE SELECTIONS
Cycle times are approximate and vary by options selected. Hot water is necessary to activate dishwasher detergent and melt fatty food soils.
An automatic sensor checks the water temperature for the main wash of each cycle. When
Auto Wash
When a partial load of lightly soiled dishes is placed in the unit, a wash cycle similar to a short wash will automatically be performed. When a full load of heavily soiled dishes is placed in the unit, a heavy wash cycle will automatically be performed. The dishwasher's Smart Sensor technology will determine the type of cycle required to clean the dishes and will clean more efficiently every time. Water usage ranges from approximately 5.5 to 10.7 gallons. Wash time ranges from approximately 99 to 162 mins.
CYCLE SELECTIONS
The Smart Sensor checks the soil level on your dishes in the Auto, Normal, Delicate and Eco cycles. Depending on soil level, the sensor will determine if additional water fills are needed to clean the dishes or if water fills can be deleted. Cycle time and water usage will vary based on the amount of soil on the dishes. Cycle time will also vary based on the options selected and the incoming water temperature.
Normal Wash
For regularly soiled dishes and silverware. Water usage ranges from approximately 4.4 to 9.5 gallons. Wash time ranges from approximately 91 to 144 mins.
Eco Wash
For lightly soiled and
5.6to 6.8 gallons. Wash time ranges from approximately 78 to 80 mins.