Electrolux 152981 73/0 manual Installation, Levelling, Water supply connections

Page 10

Installation

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on the levelling spacers on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher must be plumbed into a cold water supply.

 

The water pressure must be within the limits given in the

 

"Technical specifications"

(Instruction Book - Part 2)

.

Your local Water Authority will advise you on the average mains pressure in your area.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation. Do not use, for connection, old hoses which have been used in another appliance.

The locknut must be correctly fitted to avoid water leaks.

Avoid bends or kinks in the hose which could prevent or slow down the water supply.

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

This will prevent deposits of sand or rust clogging the inlet hose.

IN06

IN07

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it if necessary with a clip.

2.Hooked over the edge of the sink using the special

curved plastic guide (

if provided

).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

The drain hose can face either to the right or left of the dishwasher

Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water.

 

 

1

2

3

Ø

21

 

 

4 cm

 

 

min

 

18

 

 

Ø

 

 

 

 

 

 

 

 

 

 

 

max 100 cm

min 30 cm max 100 cm

CS09

 

 

 

 

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Contents Child Safety Important safety informationInstallation ConservationSetting the water softener Before useFilling with salt Refill indicator windowSalt indicator light CorrosionRinse aid Adjusting the doseOnly for models with rinse aid indicator light Filling with rinse aidUse of detergent If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Compact detergents with enzymesFor best washing and drying results Hints and tipsTo save energy Items not suitable for dishwashersCleaning the large filter Internal cleaningCleaning the central filter External cleaningSymptom Service and spare partsSomething not working Water supply connections InstallationLevelling Water outlet hose connectionElectrical connection Proceed as follows08/01

152981 73/0 specifications

The Electrolux 152981 73/0 vacuum cleaner is a versatile and efficient cleaning solution designed to meet the demands of modern households. With its innovative features and advanced technologies, this vacuum aims to simplify the cleaning process while delivering powerful performance.

One of the standout features of the Electrolux 152981 73/0 is its lightweight design, making it easy to maneuver around the house. Weighing in at just a few kilograms, it allows users to transport the vacuum effortlessly from room to room. The compact size doesn't sacrifice performance, as it is equipped with a robust motor that provides strong suction, effectively drawing in dust and debris from both carpets and hard floors.

The vacuum features advanced cyclonic technology, which ensures that dirt is separated from the airflow during operation, maintaining suction power and ensuring that the dirt container remains largely free of blockages. This not only improves the efficiency of the vacuum but also prolongs the lifespan of the unit. The easy-to-empty dust container adds convenience and minimizes mess, as users can quickly dispose of collected dirt without needing to handle traditional vacuum bags.

Another notable characteristic of the Electrolux 152981 73/0 is its filtration system, which includes a high-efficiency particulate air (HEPA) filter. This filter captures 99.97% of particles that are 0.3 microns in size, including allergens like dust mites and pet dander. This makes the vacuum an excellent choice for allergy sufferers, as it helps maintain cleaner indoor air quality.

The vacuum also comes equipped with various attachments designed to enhance its versatility. The included crevice tool is perfect for reaching tight spaces, while the upholstery brush is ideal for cleaning furniture and car interiors. Additionally, a floor nozzle allows for seamless transitions between different floor types, ensuring optimal cleaning capabilities across various surfaces.

In terms of user convenience, the Electrolux 152981 73/0 boasts a long power cord, minimizing the need to frequently change outlets during cleaning. The cord rewind feature adds to its ease of use by allowing for quick and hassle-free storage after operation.

In summary, the Electrolux 152981 73/0 vacuum cleaner combines lightweight portability with powerful suction and advanced filtration, making it an excellent choice for anyone looking to keep their home clean and allergen-free. With its innovative technologies and user-friendly design, it’s a reliable companion for all your cleaning needs.
Top Page Image Contents