Electrolux EHG 673, EHG 691 Gas Connection, Cut Out Size, Building over a cupboard or drawer

Page 9

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or copper.

The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

Cut Out Size

The dimensions of the cut-out are given in the diagram.

FO 0814

 

A) End of shaft with nut

 

B) Washer

FO 0264

C) Elbow

Rectangular cut-out size for hob

30

550

Dimensions are given in mm.

FO 2098

Building In

Building over a cupboard or drawer

If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board below the base of the hob on the underside of the work surface.

It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2.

Building over a kitchen unit with door

Proper arrangements must be taken in designing the furniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in diagram 3.

The panel fitted under the hob ("a") should be easily removable to allow easy access if technical assistance is needed. The space behind the kitchen unit ("b") can be used for connections.

 

 

 

1

 

 

ON/OFF SWITCH

 

 

FLEX

 

 

 

OUTLET

 

 

 

FO 0763

 

 

ON/OFF SWITCH

2

 

3

 

 

 

30

 

 

a

min

 

60

20

 

 

FLEX

 

b

 

 

 

 

OUTLET

 

 

 

FO 0764

FO 1013

 

 

Dimensions are given in mm.

9

Image 9
Contents Instruction Booklet Important Safety Information Description of the Hobs ContentsOperation Maintenance and CleaningService and Spare Parts Symptom SolutionSomething Not Working? Customer Care Department Guarantee ConditionsEngineers technical data Instructions for the InstallerSupply connections Appliance Class Appliance Category II2H3+Installation Important safety requirementsWhen the HOB is First Installed LocationGas Connection BuildingCut Out Size Building over a cupboard or drawerElectrical connections Supply cable replacementFitting the Hob into the worktop Permanent ConnectionFault Finding Wiring DiagramPreliminary Electrical Systems CheckIgnition System / Gas Ignition Commissioning Minimum adjustment screwConversion from Natural Gas to LPG To adjust the gas ratePage Customer Care

EHG 673, EHG 691 specifications

Electrolux, a leading global appliance manufacturer, has made a notable impact in the world of kitchen products with its innovative cooktops, particularly the EHG 691 and EHG 673 models. Both of these units exemplify Electrolux's commitment to quality, efficiency, and modern design.

The Electrolux EHG 691 is a powerful gas cooktop that features five burners, including a high-power wok burner, allowing for versatile cooking options. The burner configuration is designed to accommodate various pot sizes, making it suitable for everything from simmering sauces to stir-frying. One of its standout features is the Flame Safety Device, which automatically cuts off the gas supply if the flame goes out, providing peace of mind for safety-conscious cooks.

On the other hand, the EHG 673 model also offers a robust gas cooking experience but is slightly more compact with four burners. This model is perfect for smaller kitchens or those who may not require as much cooking power. It includes an innovative pan support system designed to provide stability and support for pots and pans, enhancing the overall cooking experience.

Both models come with sleek stainless steel finishes that not only add a touch of elegance to any kitchen but are also easy to clean and maintain. The simple-to-use control knobs are situated at the front, ensuring easy access and safety while cooking.

Electrolux has incorporated several advanced technologies into its cooktops. The gas flow is carefully engineered for optimal combustion efficiency, leading to faster cooking times and better energy use. Additionally, the removable burner caps make cleaning hassle-free, a significant consideration for those who love cooking but dread the cleanup after.

In terms of characteristics, both models are built to last, featuring durable materials that can withstand everyday wear and tear. The EHG 691 and EHG 673 are suitable for both home cooks and professional chefs looking to enhance their culinary prowess.

In summary, the Electrolux EHG 691 and EHG 673 are exceptional gas cooktops that exemplify the brand's focus on quality, functionality, and design. With their advanced features and technologies, they cater to a wide range of cooking needs, ensuring a delightful cooking experience in every kitchen.