Electrolux SM 554 To Replace the Outer Glass, To Clean the Inner Glass Door Panels

Page 24

TO REPLACE THE OUTER GLASS

1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.

2.Push the top of the oven glass towards the oven door, ensuring the screw location holes line up.

3.Hold the panel in place with one hand and insert the cross head screws into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.

4.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.

Do not attempt to use the oven without the glass being in place.

If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local Service Force Centre who will be pleased to advise further.

TO CLEAN THE INNER GLASS DOOR PANELS

Clean the inner glass door panels using a soft cloth and hot water to which a little washing up liquid has been added. If the inner panel is heavily soiled, Hob Brite may be used. Do not use abrasive cleaning materials on the door glass. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the glass.

REPLACING THE OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small Edison Screw. Part number 572 491 5431-00/1 (Available through your local Service Force Centre).

CAUTION: DISCONNECT THE APPLIANCE FROM THE ELECTRICITY SUPPLY BEFORE REPLACING THE BULB.

Open the door and remove the shelves to enable easy access to the oven light assembly. Insert a flat blade screwdriver between the oven side and glass which covers the bulb.

Support the glass with your hand and prise out sufficiently to release the glass cover. Unscrew the bulb in an anticlockwise direction until it is possible to remove the bulb with ease.

Fit the new bulb by turning in a clockwise direction until it is secure. Ensuring the indent to the flange is pointing to the rear of the oven, replace the glass by pushing it firmly into the hole to cover the bulb assembly.

Replace the shelves. Restore the electricity supply and adjust the time of day and clock as necessary.

24

Image 24 Contents
SLOT-IN Electric Cooker With GAS HOB Important Safety Information Contents Preface Introduction Grill and Oven Furniture Features Control PanelElectronic Minute Minder To SET the Time of DAYTo Cancel the Minute Minder Minute MinderGAS HOB Selecting the HOB Uses of the HOBTo Light the HOB Burners To Turn OFF ANY BurnerHeat Control Hints and TipsDual Grill Uses of the Dual GrillSelecting the Dual Grill Grill PAN and HandleGrilling Chart Food Shelf Grill TimeTOP Oven Uses of the TOP OvenSelecting the TOP Oven To FIT the TOP Oven ShelfHints and Tips Main Oven Uses of the Main OvenSelecting the Main Oven To FIT the Main Oven ShelvesHints and Tips Oven Cooking Chart Roasting Chart Roasting Chart Defrost Feature Uses of Defrost Feature Selecting Defrost Care and Cleaning Cleaning the HOBWhen Replacing Hotplate Burner Parts Cleaning the Outside of the Appliance Cleaning the Plated HandlesCleaning the Grill and Oven Furniture Cleaning Inside the Oven and Grill CompartmentsCleaning the Door Glass Cleaning Between the Outer and Inner Door GlassTo Remove the Outer Glass To Clean the Inner Glass Door Panels To Replace the Outer GlassReplacing the Oven Light Bulb Something not WORKING? Appliance does not work at allService and Spare Parts Guarantee Conditions Standard guarantee conditionsTechnical Details Loading info Electric ovensInstallation Instructions For Your SafetyChoice of Electrical Connection Important Safety Requirements Provision for VentilationMoving Your Appliance Location of Appliance Connecting to the Electricity Supply Connecting to GAS Supply Fitting the Stability Bracket Pressure Testing Checking the GrillChecking the Hotplate Checking LID SHUT-OFF DeviceMinute Minder Operation General NotePage Page Page Parkinson Cowan