Electrolux ES200 important safety instructions To Set for Broiling

Setting Oven Controls

To Set for Broiling:

1. Arrange the oven rack while oven is still cool. Position the rack as suggested in the Broil Rack Position Table below.

2. Press . " — — "will appear in display.

3. Press and hold the or until the desired broil setting level appears in

the display. Press the for HI broil or the for LO broil. Most foods

may be broiled at the HI broil setting. Select the LO broil setting to avoid

excess browning or drying of foods that should be cooked to the well-doneFig.1 (some models) stage.

4.For optimum browning, preheat broil element for 3 - 4 minutes before adding food.

5.Place the insert on the broil pan (if equipped), then place the food on the insert (if equipped; See Fig. 1).

6.Place the broiler pan and insert on the oven rack (if equipped). Open the oven door to the broil stop position when broiling (See Fig 2).

7.Broil on one side until food is browned. Turn and broil food on 2nd side. Note: Always pull the oven rack out to the stop position before turning or removing the food.

8. When broiling is finished press .

Broil Rack Position Table (Refer to Fig. 3)

Rack Postion from Top	Food category
		Fig. 2
1st rack position	Medium-rare steaks & hamburgers
2nd rack position	Fish, medium steaks & pork chops
3rd rack position	Well-done foods such as chicken & lobster

The broiler pan and the insert allows grease to drain and be kept away from the high heat of the broiler. DO NOT use the pan without the insert. DO NOT cover the insert with foil; the exposed grease could ignite. DO NOT use the broil pan without the insert or cover the insert with aluminum foil. The exposed fat could ignite.

To insure proper results when broiling use ONLY Electrolux Home

Products, Inc. approved Broil Pan & Insert.

Should an oven fire occur, close the oven door and turn the oven OFF. If the fire continues, use a fire extinguisher. DO NOT put water or flour on the fire. Flour may be explosive.

Fig. 3

12