Electrolux ES200 important safety instructions Setting Surface Controls, Using proper cookware

Page 8

Setting Surface Controls

Using proper cookware

The size and type of cookware used will influence the setting needed for best cooking results. Cookware should have flat bottoms that make good contact with the entire surface heating element (See Fig. 1). Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 2).

 

Be sure to follow the

 

recommendations for using

 

proper cookware as illustrated in

 

Figs. 1 & 2. For more information

 

about the ceramic cooktop see

 

“Cooktop Cleaning &

 

Maintenance” in the General

Fig. 2

Care & Cleaning section.

To Operate Single Radiant Surface Elements

Fig. 1

To Operate a Single Radiant Element:

1. Place correctly sized cookware on radiant surface element.

2.Push in and turn the surface control knob in either direction to the desired setting (Refer to the Suggested Radiant Surface Element Settings Table, Figs. 3 & 4). Start most cooking

operations on a higher setting and then turn to a lower setting to finish cooking. The surface control knobs do not have to be set exactly on a particular mark. Use the marks as a guide and adjust the control knob as needed. Each surface element provides a constant amount of heat at each setting. A glowing red surface heating area extending beyond the bottom edge of the cookware indicates the cookware is too small for the surface heating area.

3. When cooking is complete, turn the surface element OFF before removing the cookware.

 

Note: The Element On indicator lights will glow when one or more elements are turned ON. A quick

 

glance at these indicator lights when cooking is finished is an easy check to be sure all control knobs

Fig. 3

are turned OFF. The Hot Surface indicator light will continue to glow AFTER the control knob is turned

 

to the “OFF” position and will glow until the heating surface area has cooled sufficiently.

Suggested Radiant Surface Element Settings Table

RADIANT SURFACE ELEMENTS

Setting

Type of Cooking

The suggested settings found in Fig. 4 are based when cooking with medium-weight aluminum pans with lids. Settings may vary when using other types of pans.

Note: The size and type of utensil used, and the amount and type of food being cooked will influence the setting needed for best cooking results.

HIGH (HI - 9)

Start most foods, bring water to a boil, pan broiling

 

 

MEDIUM HIGH (7 - 8)

Continue a rapid boil, fry, deep fat fry

 

 

MEDIUM (5 - 6)

Maintain a slow boil, thicken sauces and gravies or

 

steam vegetables

 

 

MEDIUM LOW (2 - 4)

Keep foods cooking, poach, stew

 

 

LOW (LO - 1)

Keep warm, melt, simmer

 

 

 

Fig. 4

Radiant surface elements may appear to have cooled after they have been turned off. The glass surface may still be hot and burns may occur if the glass surface is touched before it has cooled sufficiently.

Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed

too close to the surface elements.

Do not allow aluminum foil, or ANY material that can melt to make contact with the ceramic glass cooktop. If these items melt on the cooktop they will damage the ceramic cooktop.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Important Safety Instructions Before Setting Oven Controls Setting Surface ControlsWarranty Back Before You CallWelcome & Congratulations Register Your ProductImportant Safety Instructions Important Instructions for Usingyour Cooktop Important Safety Notice1921 Features At a GlanceYour Electric Range Features Include Before Setting Oven Controls Element On & Hot Surface Indicator Lights About the Ceramic Glass CooktopAbout the Radiant Surface Elements Cookware Material TypesSetting Surface Controls Using proper cookwareSuggested Radiant Surface Element Settings Table To Operate Single Radiant Surface ElementsTemperature conversion Oven Control FunctionsSetting Oven Controls To Set the Minute TimerTo Change the Minute Timer while it is in use To Set the ClockTo Set Control for Oven Lockout To Set or Change the Temperature for BakingTo Set Control for Continuous Bake or 12 Hour Energy Saving To Set for Broiling Adhere to the following cleaning precautions Self-CleaningSelf-Cleaning Oven Starting the Self-Clean Cycle To Set the Controls for a Self-Clean CycleStopping or Interrupting a Self-Cleaning Cycle When the Self-Clean Cycle has CompletedCare & Cleaning Surfaces How to CleanFor heavy, burned on soil Cooktop Cleaning & MaintenancePlastic or foods with a high sugar content Special Caution for Aluminum Use on the Ceramic Cooktop Removing and Replacing the Lift-Off Oven DoorTo Remove Oven Door To Replace Oven DoorAdjusting Your Oven Temperature Care and Cleaning of Stainless Steel some modelsTo Adjust Oven Temperature Changing the Oven Light some modelsSolutions to Common Problems Before You CallOven light does not work Page Page Page Limitedwarranty

ES200 specifications

The Electrolux ES200 stands out in the realm of modern appliances with its blend of innovative technologies and user-friendly features designed to enhance everyday cleaning tasks. This versatile model caters to a wide range of cleaning needs, making it an indispensable tool in households.

One of the main features of the Electrolux ES200 is its powerful suction capability, which thoroughly tackles dirt and debris, ensuring an effective clean on various surfaces including carpets, hardwood, and tiles. The robust motor design not only enhances performance but also contributes to the appliance's energy efficiency, enabling users to enjoy strong suction without excessive power consumption.

Another notable characteristic of the ES200 is its advanced filtration system. Equipped with a HEPA filter, this model effectively captures allergens and fine particles, making it an excellent choice for those with allergies or asthma. The filter is easy to access and wash, ensuring that the vacuum maintains optimal performance over time while minimizing ongoing maintenance costs.

The Electrolux ES200 also features a lightweight design, making it incredibly easy to maneuver around the house. Its ergonomic handle design and balanced construction facilitate comfortable usage, reducing strain even during extended cleaning sessions. Add to this its corded reliability, which provides uninterrupted power, and the ES200 becomes an efficient option for deep cleaning.

In terms of versatility, the ES200 comes with a range of attachments, including a crevice tool and an upholstery brush, catering to various cleaning situations. Whether it's reaching tight corners, cleaning upholstery, or detailing your car's interior, these attachments enhance the vacuum's functionality.

Additionally, the ES200 boasts a large dust capacity, allowing users to clean for extended periods without the need for frequent bag changes. The bag system is designed for convenience and efficiency, making it straightforward to maintain and dispose of dust and debris.

In conclusion, the Electrolux ES200 encapsulates a perfect balance of power, efficiency, and convenience. With its strong suction capabilities, advanced filtration, user-friendly design, and versatility, it has carved a niche as a must-have appliance for households looking to streamline their cleaning routines. Whether tackling everyday messes or deep cleaning sessions, the ES200 is engineered to deliver unparalleled results, making it a reliable companion for maintaining a clean and healthy home.
Top Page Image Contents