Electrolux GAS ELEVATED COOKERS manual Testing the cooker features

Page 23

Testing the Operation of the Cooker

If supply pressure is above 1.20 kPa, then follow these instructions:

1.Turn all the burners to maximum.

2.Adjust the screw so that the test point pressure reads 0.85 kPa and tighten the nut slightly.

3.Turn the smallest burner to minimum and turn all the other burners off. Gently tap the regulator until test point pressure is stable and read pressure.

4.Turn all the burners to maximum and read pressure. Evaluate the difference between this reading and the one you read in Step 3.

5.Adjust the screw so that the difference between this reading and 1.0 kPa is about half the difference between the two readings found in Steps 3 and 4.

6.Repeat Steps 3 to 5 until no further adjustment is needed.

NOTE: The 1.0 kPa should now be about halfway between the reading with all the burners on at maximum and the reading when the small burner is on minimum (see diagram below).

1.2kPa —

1.1kPa —

1.0kPa —

0.9kPa —

0.8kPa —

 

 

 

 

 

1.2 kPa —

 

 

 

 

 

1.1 kPa

 

 

 

1.0 kPa lies

 

halfway between

 

1.0 kPa

these two readings

 

 

 

 

 

 

 

 

0.9 kPa

 

 

 

 

 

0.8 kPa

 

 

 

 

 

 

 

Test Point Pressure with all

Test Point Pressure with small

burners operating at maximum.

burner operating at minimum.

7. Lock the nut.

Testing the cooker features

Observe the flame appearance on each burner. If it is much larger or smaller than expected, then the injector size needs checking.

NOTE: When flame is unsatisfactory, then refer to the Electrolux Technical

Publications and correct the fault, if possible.

When the maximum flame appearance is correct, then check the turn-down setting on each burner. If the settings appear to be incorrect, proceed as follows:

1.Adjust the bypass screw on each hotplate control cock. This is accessible when the control knob is removed. Use a thin flat screwdriver inserted through a hole in the centre of the control cock spindle.

NOTE: If the hotplate control cock does not have a hole in the centre of the control cock spindle, then remove the control panel and adjust the bypass screw mounted on the body of the hotplate control cock.

2.Check the ignition on all burners both separately and in combination.

3.Check the operation of the electrical components, if applicable.

4.If you are satisfied that the cooker is operating correctly, then turn it off and show the customer how to use it. Make sure you ask the customer to operate the clock and the controls.

NOTE: If the cooker cannot be adjusted to perform correctly, then inform the customer of the problem and put a warning notice on the cooker. If the problem is dangerous, then disconnect the cooker. If there is a fault, then the customer should be advised to contact the manufacturer’s local service organisation or the retailer.

23

Image 23
Contents GAS Elevated Cookers Contents Hotplate burners Grilling Fan baking Baking General Safety WarningsCooking Guide Symbols Manual Ignition Model ControlsHotplate Burner Control Knob Electronic Ignition ModelsRemovable Shelf Side Support Parts of your CookerPreheating the oven Using the OvenLighting the oven Oven Safety Warnings Oven Cooking Guide Food Temperature & Time Conventional Oven FAN Forced OvenHandling Baking Problems Lighting the grill Using the GrillGrill Safety Warnings Handling grilling problemsManual ignition Models Using Hotplate BurnersHotplate Safety Warnings Setting the timer Using the Timer and ClockUsing the 60 minute ringer timer Using the electronic clockCleaning the cooktop Cleaning the CookerSafety Warnings about cleaning Cleaning the enamelRemoving the grill dish supports Cleaning the grill compartmentRemoving the grill dish Replacing the oven door Cleaning the Oven DoorRemoving the oven door Removing the oven light glass Fan forced models only Cleaning the Oven CompartmentRemoving the oven shelves Removing the oven shelf supportsSolving Problems Locating the cooker Installing the CookerSafety warnings about installation Checking pipe size Checking gas pressuresOperation on Propane Gas connectionOperation on NG/SNG Operation on SNGNatural gas Testing the Operation of the CookerChecking gas supply Testing the cooker features 0800 10 66

GAS ELEVATED COOKERS specifications

Electrolux gas elevated cookers are a pinnacle of modern kitchen technology, designed to provide exceptional cooking performance, versatility, and convenience. These cookers not only elevate the cooking experience but also cater to a variety of culinary needs, making them an ideal choice for both avid home cooks and professionals.

One standout feature of Electrolux gas elevated cookers is their powerful gas burners. With multiple burner options, including high-output and simmer burners, users can achieve precise temperature control for a wide range of cooking techniques. Whether it's quickly boiling water for pasta or gently simmering a sauce, these burners ensure consistent heat distribution for optimal results.

Another notable aspect of these cookers is their spacious cooking surface. The elevated design provides ample space for multiple pots and pans, allowing for seamless multitasking. This is particularly beneficial for larger families or when entertaining guests, as one can prepare several dishes simultaneously without compromising on space or efficiency.

Electrolux is committed to innovation, and their gas elevated cookers incorporate various advanced technologies. The incorporation of even-heat technology ensures that food is cooked evenly throughout. This is particularly advantageous when baking or roasting, as it eliminates the risk of hot spots and uneven cooking results. Additionally, some models feature infrared broilers that deliver intense heat for perfectly browned and caramelized dishes.

Safety is a priority with Electrolux gas cookers. They are equipped with flame failure devices, which automatically shut off the gas supply if the flame goes out. This ensures peace of mind and reduces the risk of gas leaks, making their cookers safe for everyday use. The ergonomic design also includes sturdy knobs and controls, allowing for easy adjustments even when cooking at high temperatures.

Cleaning is effortless with Electrolux gas elevated cookers, thanks to features such as removable grates and sealed burners. These design aspects facilitate quick and thorough cleaning, maintaining the aesthetic appeal of the kitchen. Some models even come with self-cleaning options, ensuring that maintenance is minimal.

In summary, Electrolux gas elevated cookers blend robust features with cutting-edge technology, making them an ideal choice for both casual and experienced cooks. With powerful burners, spacious surfaces, and safety features, these cookers stand out in any kitchen. Electrolux remains dedicated to providing appliances that enhance culinary experiences, making cooking enjoyable and efficient.