Electrolux 95752 G manual Description of the Hob, Installation

Page 5

Description of the Hob

1

2

4

2

3

2

5

1.Hob Top

2.Semi-rapid Burners

3.Auxiliary Burner

4.Rapid Burner

5.Control knobs

INSTALLATION

Any gas installation must be carried out by a registered CORGI installer, and in accordance with existing rules and regulations.

The relevant instructions are to be found in the second section of this manual.

Please, ensure that, once the hob is installed, it is easily accessible for the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTALLED

Once the hob has been installed, it is important to remove any protective materials, which were put on in the factory.

5

Image 5

Contents Instruction Booklet 95752 G Gas hobInstallation Important Safety InformationChild Safety During UseEnvironmental Information ServiceContents Description of the Hob InstallationHob burners OperationHob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Symptom SolutionCustomer Care Service and Spare PartsEuropean Guarantee Guarantee ConditionsEngineers technical data Instructions for the InstallerLocation Important safety requirementsGas Connection InstallationBuilding over a cupboard or drawer BuildingCut Out Size Building over a kitchen unit with door Fitting the hob to the worktop This HOB Must be Earthed Electrical connectionsPermanent Connection Wiring diagramReplacement of the cable Preliminary Electrical Systems Check Fault FindingEarth Continuity Check Ignitor does not spark Ignition System / Gas IgnitionCommissioning Pressure TestingMethod To adjust the gas rateFrom the Electrolux Group. The world’s No.1 choice