Electrolux EKM6044, EKM6045 user manual Installation Instructions, Important Safety Requirements

Page 30

INSTALLATION INSTRUCTIONS

IMPORTANT - SAFETY REQUIREMENTS

Where applicable Natural Gas and L.P Gas versions of this appliance are available. Check that this model is suitable for the type of supply available. This appliance must be installed and/or serviced by a competent person, in accordance with the Gas Safety (Installation and Use) Regulations Current Editions and the IEE Wiring Regulations. Detailed recommendations are contained in the following British Standards Codes of Practice - BS.5440: Par 2 and BS.6891. All British Standards must be 'Current Editions'.

This appliance must be installed by a qualified electrician / competent person (CORGI Registered). Safety may be impaired if installation is not carried out in accordance with these instructions.

Before connecting the appliance make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

Do not alter the electrical circuitry of this appliance.

PROVISION FOR VENTILATION

This appliance is not connected to a combustion products evacuation device. It shall be installed and connected in accordance with the current installation regulations. Particular attention shall be given to the relevant requirements regarding ventilation.

The room containing the appliance should have an air supply in accordance with BS.5440: Part 2 Current Edition. All rooms require an openable window or equivalent and some rooms will require a permanent vent as well. For room volumes up to 5m3 an air vent of 100cm2 is required: for room volumes between 5m3 and 10m3 an air vent of 50cm2 is required. If the room has a door that opens directly to the outside, no air vent is required. For room volumes that exceed 11m3 no air vent is required. If there are other fuel burning appliances in the same room, BS.5440: Part 2 Current Edition should be consulted to determine the requisite air vent requirements.

Prolonged intensive use of the appliance may call for additional ventilation, for example opening a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Model EKM6044 / EKM6045 Child Safety Important Safety InformationInstallation Cleaning and MaintenanceContents Description of the Appliance SLIP-IN Electric Double Oven with GAS HOBControl Panel Features Getting to Know Your ApplianceBefore Using the Appliance Timer HOW to SET the Time of DAYHOW to SET the Countdown To Cancel the Countdown Setting the Oven Timer ControlTo SET the Timer to Switch on and OFF Automatically To Return the Appliance to Manual To SET the Timer to Switch OFF onlyTo Cancel AN Automatic Programme Things to NoteTo Light the HOB Burners Using the HOBGAS HOB To Turn OFF ANY BurnerHints and Tips Grill PAN and Handle Using the GrillGrill Ensure the handle is correctly locatedPosition Grilling ChartFood Grill TimeUsing the TOP Oven TOP OvenTo FIT the TOP Oven Shelf Hints and Tips Using the Main Oven Main OvenTo FIT the Main Oven Shelves Hints and Tips Oven Cooking Chart FAN Oven TOP Oven Food Position Cooking Approx Temp C TempcRoasting Chart MeattemperatureDefrost Feature Using Defrost FeatureCleaning the Outside of the Appliance Care and CleaningCleaning Materials Cleaning the Control Knobs and HandlesCleaning the HOB When Replacing Hotplate Burner PartsCleaning Inside the Grill and Oven Compartments Aerosol cleaners must not be used on Stayclean surfacesTo Remove the Outer Glass Cleaning the DoorsCleaning Between the Outer and Inner Door Glass To Replace the Outer GlassReplacing AN Oven Light Bulb Problem Possible SolutionSomething not WORKING? Service and Spare Parts Guarantee Conditions This guarantee does not coverConnections DimensionsTechnical Details GeneralInstallation Instructions Important Safety RequirementsProvision for Ventilation Location of Appliance For Your SafetyMoving Your Appliance Levelling the ApplianceConnecting to the Electricity Supply Connect to 230 240V AC supply onlyEnsure That the Links are Fitted AS Shown Connecting to GAS Supply Pressure TestingFitting the Stability Chain Checking LID SHUT-OFF Device Checking the GrillChecking the Hotplate Checking the TOP OvenPage Important Notice
Top Page Image Contents