Appliance Description
Control Panel
Thermostat control knob
Starting Up
Signal light
Please clean the appliance interior and all accessories prior to initial start up (see section: “Cleaning and Care”).
Insert the mains plug of the chest freezer into the mains supply. Set the thermostat control knob to a medium setting and leave the appliance to run for 2 hours before placing any food inside.
The temperature inside the freezer must be
When the appliance has reached the correct temperature for safe storage of frozen food the red signal light will illuminate. If the temperature in the freezer is too high the light will go out. The light may go out for the following reasons:
There is a power failure.
The lid has been recently opened.
A large quantity of food has been added to the appliance. There is a fault.
Important: Check regularly on the red temperature warning light and on a thermometer placed inside whether the storage temperature is being maintained.
10