Freezer
The freezer compartment, however, will become progressively covered with frost. This should be removed with the special plastic scraper provided, whenever the thickness of the frost exceeds 4 mm. During this operation it is not necessary to switch off the power supply or to remove the foodstuffs.
However when the ice becomes very thick on the inner liner, complete defrosting should be carried out as follows:
1. | Remove the frozen food from the freezer, wrap it in several layers of new- | |
| spaper and put it in a very cool place. |
|
2. | Switch off the appliance and pull |
|
| out the plug or turn the tempera- |
|
| ture selector to “0” OFF. |
|
3. | Leave the freezer compartment door |
|
| open. |
|
4. | Insert the plastic scraper into the |
|
| recess provided under the defrost |
|
| water channel and place a collecting |
|
| basin under it. |
|
5. | Once defrosting is completed keep |
|
| the scraper for future use. |
|
6. | Turn the thermostat knob to the | D068 |
| required setting and replace the plug | |
|
| |
| in the power socket. |
|
| Warning! |
|
Never use metal tools to scrape off the frost
Do not use a mechanical device or any artificial means to speed up the thawing process.
A temperature rise of the frozen food packs, during defrosting, may shor- ten their safe storage life.
Switching off the appliance
To switch off the appliance, turn the temperature regulator to position "0" or disconnect from the electricity supply.
If the appliance is not going to be used for an extended period:
1.Remove all refrigerated and
12