Energy Saving Tips
•Do not install the appliance near cookers, radiators or other sources of continuous warmth. High ambient temperatures cause longer, more fre- quent operation of the compressor.
•Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings.
•Do not place warm foods into the appliance. Allow warm foods to cool first.
•Do not leave the door open any longer than necessary.
•Do not set temperature any colder than necessary.
•Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge.
Accumulation of dust on the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. Ensure the appliance is switched off.
Something Not Working
If the appliance is not functioning correctly, please carry out the fol- lowing checks before contacting your local AEG Service Force Centre.
Warning!
Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunc- tioning.
Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
|
| Appliance is not switched on |
| Switch on the appliance. |
|
|
|
|
|
|
|
|
|
|
|
| Mains plug is not plugged in or |
| Insert mains plug. |
Appliance does not work. |
| is loose. |
|
|
|
|
|
| |
|
| Fuse has blown or is defective. |
| Check fuse, replace if necessary. |
|
|
|
|
|
|
|
|
|
|
|
| Socket is defective. |
| Mains malfunctions are to be |
|
|
| corrected by an electrician. | |
|
|
|
| |
|
|
|
|
|
Appliance cools too much. |
| Temperature is set too cold. |
| Turn the temperature regulator |
|
| to a warmer setting. | ||
|
|
|
|
14