Electrolux U 86050-4 I Technical terminology, Refrigerant Circuit, Evaporator, Compressor

Page 30

This appliance is in accordance with the following EU guidelines:

–73/23/EWG dated 19 February 1973 - low voltage guidelines.

–89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline

Technical terminology

•Refrigerant

Liquids that can be used to a generate a cooling effect are known as refrigerants. They have a relatively low boiling-point, indeed so low, that the warmth from the food stored in the fridge or freezer can cause the refrigerant to boil and vaporise.

•Refrigerant Circuit

Closed circulation system that contains the refrigerant. The refriger- ant circuit comprises primarily of an evaporator, a compressor, a con- denser and pipe work.

•Evaporator

The refrigerant is evaporated in the evaporator. Similar to all other liquids, refrigerant requires heat to evaporate. This heat is removed from the interior of the appliance, as a result the interior is cooled. The evaporator is therefore located inside the appliance or placed in foam immediately behind the inner wall and thus not visible.

•Compressor

The compressor looks like a small drum. It is driven by a built-in electric motor and is mounted on the base of the appliance at the rear. The task of the compressor is to draw in vaporised refrigerant from the evaporator, to compress it, and to pass it on to the con- denser.

•Condenser

The condenser normally has the form of a grid. The refrigerant com- pressed in the compressor is liquefied in the condenser. During this process, heat is released to the surrounding air at the surface of the condenser. The condenser is mounted on the base of the appliance.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Arctis Dear customer Contents Intended use Important Safety InstructionsSafety of children Prior to initial start-upImportant Safety Instructions Daily OperationCase of malfunction Disposal of old Appliances DisposalAppliance Packaging Information DisposalInstallation Installation LocationRemove transport packaging Grid preparation Left door openingUntil they click That case, wait for the nat Ural fitting of the gasket or InstallationReversing the door TingInstallation kit Building the appliance in under a worktopPush the appliance into To mount the furniture door UresInstallation Furniture panel Refit the covering strip Power supply Fitting the plinth220 .. V ~50 Hz Electrical Connection Wires in the mains lead are coloured Accordance withAs the colours of the wires in the mains lead Following code Green and Yellow Earth Blue NeutralDescription of the appliance Prior to Initial Start-UpView of the appliance Operating and indicator panel Red temperature warning light 4 comes on whenFast-freeze button 6 with its yellow You can switch off the warning tone by closing the door Temperature WarningOpen Door warning Setting 4 means Starting up and temperature regulationSetting 1 means Recommended regulator setting 1.5 toSwitching off the appliance Freezing and storing frozen foodTips Preparation of Ice Cubes Storage Goods Symbols/Freezing CalendarSymbols on the drawers show Different types of frozen goods DefrostingCleaning and Care Magnetic door seal Energy Saving Tips What to do ifCorrecting Malfunctions Symptoms Possible Cause Remedy What to do ifClicks Noises during OperationRegulations, Standards, Guidelines HummingEvaporator Technical terminologyRefrigerant Circuit CompressorPage AEG Hausgeräte GmbH Postfach 90327 Nürnberg Electrolux plc
Top Page Image Contents