Electrolux 818 35 94-01/2 manual Opening the door, Temperature memory, Function Errors

Page 23

Temperature memory

3 While the current freezer temperature is above -11 °C, the warmest temperature the freezer has reached during the alarm period is stored and can be called up as often as wished by pressing the ALARM OFF button.

If the temperature in the freezer compartment drops to under -11 °C and the ALARM OFF button has not been pressed prior, the warning tone will switch off automatically. The red warning indicator and the temperature display will continue to flash.

If the ALARM OFF button is pressed now, the red warning indicator switches off. In addition, the temperature display will show for five sec- onds the highest temperature the frozen food has warmed to. Then the display will change to the current freezer temperature. The stored high- est temperature is now erased.

Attention! If suspicion of partial or complete thawing exists, please check the quality of the foods to determine if they can be used.

Function Errors

If the appliance electronics detects a technical fault that needs to be rectified by customer service, the temperature display shows a square in the lower part of the temperature display or a letter. The red warning indicator flashes. The appliance will continue to operate in emergency mode.

Opening the door

If the door is closed when the appliance is in operation, it cannot be immediately opened again, because a vacuum occurs which holds the door closed until pressure has been equalised. The door can be opened again after several minutes.

818 35 94-01/2

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents
Arctis Dear customer Contents What to do if Cooling drinksRefrigerant Important Safety InstructionsPrior to Installation InstallationServicing Child SafetyMaintenance and Cleaning During UseOld appliance Environmental InformationAppliance Transport Packaging materialDle bracket on the lower left-hand side of the door Before UseFitting the Door Handle PackagingFreezer needs ventilation InstallationInstallation Location A higher power consumption see also Something not workingNals in your plug, proceed as fol- lows Appliance AlignmentElectrical Connection EarthRight. Close the door Reversing the doorMove the upper hinge bracket pivot to the left Reversing the door No-frost frost free system Cold accumulation block Description of the applianceView of the appliance Control Panel Temperature setting buttonsThese buttons are connected to the temperature display Temperature display TURBO/FROSTMATIC-button Alarm OFF button Remove the cold accumulation block from the appliance Prior to Initial Start-Up Initial use Select Freezing or Cooling Temperature AdjustmentSwitching the Appliance Off Open Door Warning Temperature WarningRed warning indicator will go out when the door is closed Control and Information SystemsOpening the door Temperature memoryFunction Errors Freezing Only in the operating mode FreezingTips Frozen StoragePreparation of Ice Cubes Long Fresh Cooling Storage Goods Symbols/Freezing CalendarMaximum Load CoolingCooling drinks Standard CoolingFood Storage Energy Saving AdviceHints and Tips Normal Operating SoundsExternal Cleaning Maintenance and CleaningInternal Cleaning Correcting Malfunctions What to do ifWhat to do if Refrigerant circuit has been checked for leaks Regulations, Standards, GuidelinesReplacing the light bulb Replace defective light bulb Place the cover againCompressor Technical TerminologyRefrigerant Circuit EvaporatorStandard Guarantee Conditions Guarantee ConditionsMajor Appliances Service & Spare Parts08705 929 Customer CareSubject to change without notice
Top Page Image Contents