![](/images/new-backgrounds/1061053/6105317x1.webp)
Installation
Installation Location
The appliance should be installed in a well ventilated, dry room.
Energy use and efficient performance of the appliance is affected by the ambient temperature.
The appliance should therefore
–not be exposed to direct sunlight;
–not be installed next to radiators, cookers or other sources of heat;
–only be installed at a location whose ambient temperature corresponds to the climate classification, for which the appliance is
designed.
The climate classification can be found on the rating plate, which is located at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each climate classification:
Climate classification | for an ambient temperature of |
SN | +10 to +32 °C |
N | +16 to +32 °C |
ST | +18 to +38 °C |
T | +18 to +43 °C |
|
|
The freezer needs ventilation
Air is fed under the door through the vent
slots in the base and is exhausted upwards along the back wall. To ensure proper air circulation never cover or alter the vent
openings.
Important! If the appliance is installed under, for example, a hanging cabinet, a clearance of at least 10 cm between the top of the appliance and the cabinet above it must be maintained.
Please check whether, after installing your
appliance and especially after reversing the door, the door seal fits tightly. A badly fit- ting door seal may lead to heavy frosting
and a higher power consumption (see also “Something not working“).
818 35 | 9 |