electrolux 9
Installation
Read the "Safety Information" carefully for your safety and correct operation of the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the cli- mate class indicated on the rating plate of the appliance:
Climate |
| Ambient temperature |
class |
|
|
SN |
| +10°C to + 32°C |
N |
| +16°C to + 32°C |
ST |
| +16°C to + 38°C |
T |
| +16°C to + 43°C |
|
|
|
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate cor- respond to your domestic power supply. The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power sup- ply socket is not earthed, connect the appli- ance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above safety precautions are not ob- served.
This appliance complies with the E.E.C. Di- rectives.
Door reversibility
The door of the appliance opens to the right. If you want to open the door to the left, follow these steps before you install the appliance:
1.Loosen and remove the upper pin.
2.Remove the door.
3.Remove the spacer.
4.With a key, loosen the lower pin.
On the opposite side:
1.Tighten the lower pin.
2.Install the spacer.
3.Install the door.
4.Tighten the upper pin.
Ventilation requirements
The airflow behind the appliance must be sufficient.