Electrolux 70322 KG manual Regulations, Standards, Guidelines

Symptom	Solution
	If the door seal is not airtight (probably
	after reversing the door) apply warm air
	to the non sealing area using a hair dryer
Excessive build up of frost.	set to a gentle heat. (do not use a fan
	heater for this purpose). This will make
	the rubber more supple and allow it to
	revert to its original shape.
	Adjust the temperature to give correct
	temperature control.
	Check that the doors are closed.
The compressor runs continuously	Large quantities of food have recently
	been placed in the cabinet and/or door is
	frequently opened.
	Check that air ventilation is not
	obstructed.
Noise	Refer to Normal Operating Sounds
The compressor does not start	This is normal, the compressor starts after
immediately after changing the
	a period of time.
temperature setting.

If after the above checks there is still a fault, call your local AEG Service Force Centre.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service calls.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), accident prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

40 818 35 28-00/2