Electrolux 66050i installation instructions Defrosting

Page 23

Defrosting

During use and when the door is opened, moisture is deposited as frost inside the appliance, particularly on the evaporator melts. This frost must be removed from time to time using the soft plastic scraper supplied. Under no circumstances use hard or pointed objects for this purpose.

The freezer should always be defrosted when the layer of frost has reached a thickness of approx. 4 millimetres. Defrost should be carried out once a year regardless of the amount of frost that has built up. A good time for defrosting is when the appliance is empty or contains only little food.

Each temperature rise reduces the keeping qualities of your frozen food. Around 12 hours before defrosting your freezer, switch over to fast freeze to build up a low temperature reserve in the frozen food.

Warning!

Do not use electrical heating appliances or any other mechanical or artificial devices to speed up the defrosting process.

Do not use defrosting sprays, they can be hazardous to your health and/or contain substances that damage plastics.

Caution! Do not touch frozen food with wet hands. Your hands could stick to the food and can cause skin abrasions.

Remove frozen food, wrap it in several layers of newspaper and store it, covered, in a cool place.

Switch off the appliance and unplug it, or pull the fuse or switch off the circuit breaker.

Remove all drawers except the bottom one. The bottom drawer serves as a practical container to collect the water from the thawing ice. Tip: To speed up the defrosting process, place a pan with warm water in the appliance and close the door. Remove pieces of ice that have fallen before they completely defrost.

Remove the bottom drawer and dry the interior of the bottom com- partment thoroughly.

After defrosting, thoroughly clean the freezer compartment and inte- rior fittings ( see "Cleaning and Care" section).

23

Image 23
Contents Arctis U Dear customer Contents Refrigerant Important Safety InstructionsSafety of children Prior to initial start-upCase of malfunction Daily OperationDisposal of old Appliances DisposalRemove transport packaging Appliance Packaging InformationLeft door opening InstallationInstallation Location Grid preparationReversing the door With those indicated in the figure Building the appliance in under a worktopLeft hand Bracket Right hand 115 To mount the furniture door Proceed as shown in the fig Ures Furniture panel Refit the covering strip Fitting the plinth Power supplyElectrical Connection As the colours of the wires in the mains leadView of the appliance Description of the appliancePrior to Initial Start-Up Fast-freeze button 6 with its yellow Operating and indicator panelRed temperature warning light 4 comes on when Open Door warning Temperature WarningFreezing and storing frozen food Starting up and temperature regulationIce pack Page Tips Storage Goods Symbols/Freezing CalendarPreparation of Ice Cubes Defrosting Cleaning and Care Switching off the applianceMagnetic door seal Correcting Malfunctions Energy Saving TipsWhat to do if Appliance does not work, no pilot light is illuminated Symptoms Possible Cause RemedyOccurred Period of time 08705 929 Service & Spare PartsHelp us to Help You Customer CareRegulations, Standards, Guidelines Noises during OperationEvaporator Compressor Condenser Technical terminology