6electrolux
How the electronic Touch Con-
trols on the oven work
All the oven functions are controlled electronically. You can select any com- bination of cooking function, cooking temperature and automatic timing us- ing the touch controls.
Make sure you touch just one control button at a time. If you touch the cooking function control for a longer time, the next cooking function will be selected.
The light bar
The light bar is located right above the display and can be activated/deactivated
by touching the “On/Off” control 
.
In the event of a power failure, the programmer will keep some of the the settings (e.g. time of day, language setting, the menu My Programmes).
The display switches off automatically after two minutes if no function is selected and none of the touch controls are used. The display shows the time of day, if set.
Safety Thermostat
To prevent dangerous overheating (through incorrect use of the appliance or defective components), the oven is fitted with a safety thermostat, which interrupts the power supply. The oven switches back on again automatically, when the temperature drops.
Should the safety thermostat trigger due to incorrect use of the appliance, it is enough to remedy the error after the oven has cooled down; if on the other hand, the thermostat triggers because of a defective component, please contact Customer Service.
Cooling fan
This oven is provided with a cooling fan, meant to keep the front panel and the oven door handle cool. The fan switches on automatically after a few minutes of cooking. Warm air is blown out through vents between the oven door and the control panel, as shown in the diagram. When the oven is switched off, the fan will remain on in order to to keep the controls cool, after which it switches off automatically. This is quite normal.