![](/images/new-backgrounds/1041161/4116171x1.webp)
CHECKING THE MAIN OVEN
1.Turn on the oven thermostat control knob to mark 9 and press the ignition button. As soon as the burner is alight the button can be released.
2.There should now be a low gas rate to the burner, which is the F.S.D by pass rate.
3.When the F.S.D. phial has heated up it opens the F.S.D valve which allows the main gas supply to the oven burner.
4.After 1 minute check that the flame covers the full width of the burner and is stable.
5.Set the oven control to Mk 2, close the oven door and check that after about 10 minutes the flame size has reduced.
6.Turn off the control and check that the oven flames go out.
CHECKING THE MAIN OVEN LIGHT
Turn the main oven thermostat knob full on and check that the main oven light is operative. Turn off the thermostat.
TO SET THE TIME OF DAY
Please refer to the Timer section.
GENERAL NOTE
Instruct the user on how to use the appliance and its ignition system. Refer the user to the wording on the inside cover which gives advice on the safe operation of the appliance.
36