Care & Cleaning 25
STARTING SELF-CLEAN CYCLE
The 
or 
pad controls the
directly after a
*It is recommend to use a 2 hour
During the
DO NOT force the oven door open. This can damage the automatic door locking system. Use care when opening the oven door after the
To set the controls for a 3 hour
1.Be sure the clock is set with the correct time of day and the oven door is closed.
2.Press 
or 
. "CLn" will flash and "3:00" HR will show in the display (Figure 1). The control will automatically clean for a 3 hour period (default self-
cleaning cycle time). Note: If a 2 or 4 hour clean time is desired, press 
for 2
hour or press 
for a 4 hour clean time. Set the cleaning time based on the amount of soil; light, medium or heavy (* See above).
3.Press 
or 
. The "DOOR LOCKED" icon will flash; and the letters "CLn" will remain on in the display (Figure 2).
4.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator
light will stop flashing and remain on. Also, the oven icon will appear in the display (Figure 3).
Note: Allow about 15 seconds for the oven door lock to close.
When the Self-Clean Cycle is Completed:
1.The time of day and "DOOR LOCKED" will remain on (Figure 4).
2.Once the oven has cooled down for 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Figure 5).
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a
1.Press 
or 
.
2.Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed,the oven door can then be opened (Figure 5).
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5