Electrolux 318201811 Important Notes to the Installer, Important Note to the Consumer

Page 2

WARM & SERVE DRAWER INSTALLATION INSTRUCTIONS

Important Notes to the Installer

1.Read all instructions contained in these installation instructions before installing appliance.

2.Remove all packing material from appliance before connecting the electrical supply.

3.Observe all governing codes and ordinances.

4.Be sure to leave these instructions with the consumer.

Important Note to the Consumer

Keep these instructions for future reference.

IMPORTANT SAFETY INSTRUCTIONS

•Be sure your appliance is installed and plugged into a 120 Volt grounded outlet.

•This appliance must be electrically grounded in accordance with the National Electrical Code ANSI/ NFPA No. 70—latest edition in the United States, or CSA C22.1, Part 1 in Canada, and local code requirements.

Tools You Will Need

Phillips® Screwdriver

Pencil

Ruler or Tape Measure and Straight-edge

Hand Saw or Saber Saw

Spirit Level

Warm & Serve Drawer Installation

1.Locate the 2 anti-tip brackets supplied as shown on fig. 1.

c/c 25 5/16"

(64.3 cm)

Use screws

 

supplied to attach

 

drawer to front of

Figure 2

cabinet.

 

Model and Serial Number Location

The serial plate is located as shown below.

When ordering parts for or making inquiries about your Warm & Serve Drawer, always be sure to include the model and serial numbers and a lot number or letter from the serial plate on your Warm & Serve Drawer.

Serial PlateLocation

Combination Warm & Serve Drawer

and Cooktop Installation

24" (64.3 cm) Max. 23 5/8" (60 cm) Min.

c/c 12 21/32"

(32.15 cm)

Figure 1

2.Slide drawer into cutout opening until front frame of drawer is flush against cabinet. Be careful not to pinch electrical cord.

3.Remove the drawer as instructed in the Use & Care Guide and secure drawer housing to cabinet using the

3nickel-plated screws supplied (see Figure 2). Do not overtighten screws.

4.The 60" (152 cm) appliance power cord can now be connected into the 120 Volt outlet.

5.Proceed with mounting built-in oven above the drawer (if applicable). Follow installation instructions provided with built-in oven. Make sure to use anti-tip brackets supplied with the built-in oven.

A

Minimum Depth Spacing To Clear Cooktop Burner Box

Electric Cooktop

Spacing "A"

Gas Cooktop

 

 

 

E30IC75, E36IC75

4.5" (11.43cm)

 

 

 

 

E30EC65, E36EC65

6.0" (15.24cm)

 

 

 

 

E36EC75

7.5" (19.05cm)

 

 

 

 

 

8.5" (21.59cm)

E36GC75

 

 

 

E30EC70, E36EC70

5.0" (12.7cm)

 

 

 

 

2

 

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents General Information Warm & Serve Drawer Installation InstructionsWarm & Serve Drawer Dimensions Stand Alone Installation FloorImportant Note to the Consumer Important Notes to the InstallerWarm & Serve Drawer Installation Tools You Will NeedInformación General Dimensiones del cajón calentadorInstrucciones DE Instalación Para EL Cajón Calentador Instalación de la unidad independienteHerramientas que usted necesita Notas importantes para el instaladorNota importante para el consumidor Instalación del cajón calentadorCombiné tiroir-réchaud Four encastré de 30 76 cm Instructions D’INSTALLATION Pour LE TIROIR-RÉCHAUDRenseignements Généraux PlancherOutils nécessaires Emplacement des numéros de modèle et de sérieInstallation d’un tiroir-réchaud Table de Espacement a Table de cuisson Cuisson électriqueInstructions D’INSTALLATION Pour LE TIROIR-RÉCHAUD Instructions D’INSTALLATION Pour LE TIROIR-RÉCHAUD

318201811 specifications

The Electrolux 318201811 is a versatile range vent hood designed for modern kitchens, combining sleek aesthetics with advanced functionality. This appliance exemplifies Electrolux's commitment to quality and innovation, making it a popular choice among discerning homeowners and culinary enthusiasts alike.

One of the standout features of the Electrolux 318201811 is its powerful ventilation system. With multiple fan speeds, it efficiently removes smoke, steam, and cooking odors from the kitchen, ensuring a comfortable environment while cooking. The hood’s high CFM (cubic feet per minute) rating indicates strong airflow, capable of handling even the most demanding cooking tasks. Additionally, the quiet operation of the fan allows users to enjoy conversations and kitchen activities without distraction.

This range vent hood is engineered with a sophisticated LED lighting system. The energy-efficient LED lights illuminate the cooking surface, providing bright and clear visibility while preparing meals. These lights not only enhance functionality but also contribute to the overall ambiance of the kitchen, making the cooking experience more enjoyable.

The Electrolux 318201811 features a sleek stainless steel design that complements modern kitchen aesthetics. Its clean lines and polished finish make it an attractive addition to any kitchen decor. The easy-to-clean stainless steel surface ensures that the hood maintains its luster over time, with minimal maintenance required.

In terms of installation, this vent hood offers flexibility with various mounting options, fitting seamlessly into different kitchen layouts. Whether it is placed under a cabinet or as a wall-mounted feature, the Electrolux 318201811 adapts to suit individual preferences and space requirements.

Another notable characteristic is its user-friendly control interface. The intuitive buttons or touch controls allow for easy operation, enabling users to adjust fan speeds and lighting effortlessly. The presence of a filter indicator ensures that users are alerted when it’s time to clean or replace the filters, promoting optimal performance.

Overall, the Electrolux 318201811 combines powerful ventilation, modern design, and user-friendly features, making it an excellent choice for anyone looking to enhance their kitchen's functionality and style. With its blend of performance and elegance, this range vent hood represents the brand's commitment to improving the cooking experience in homes around the world.
Top Page Image Contents