and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse.
•Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical components, danger of electrical shock! Hot vapours can lead to the damage of plastic parts.
•The appliance must be dry before it is placed back into service.
Important!
•Ethereal oils and organic solvents can attack plastic parts, e.g.
– lemon juice or the juice from orange peals;
– butyric acid;
– cleansers which contain acetic acid.
Do not allow such substances to come into contact with appliance parts.
•Do not use any abrasive cleansers.
☞Remove the food from the refrigerator. Store it in a cool place, well covered.
☞Switch the appliance off and remove the plug from the mains, or switch off or turn out the circuit breaker or fuse.
☞Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish washing detergents may also be used.
☞After cleaning wipe with fresh water and rub dry.
Accumulation of dust at the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appli- ance once a year with a soft brush or a vacuum cleaner.
☞ Check the water drain hole on the rear wall of the fridge.
Clear a blocked drain hole with the aid of the green peg in the pack of accessories included with the applian- ce.
☞ After everything is dry place appliance back into service.
15