Malfunction |
| Possible Cause |
| Remedy |
|
|
|
|
|
Appliance does not work.
Appliance cools too much.
The food is too warm.
Appliance is not switched on.
Mains plug is not plugged in or is loose.
Fuse has blown or is defective
Socket is defective.
Temperature is set too cold.
Temperature is not properly adjusted.
Door was open for an extended period.
A large quantity of warm food was placed in the appliance within the last 24 hours.
The appliance is near a heat source.
Switch on the appliance.
Insert mains plug.
Check fuse, replace if nec- essary.
Mains malfunctions are to be corrected by an electrician.
Turn the temperature reg- ulator to a warmer setting temporarily.
Please look in the “Initial Start Up” section.
Open the door only as long as necessary.
Turn the temperature reg- ulation to a colder setting temporarily.
Please look in the “Installation location” section.
Interior lighting does not work.
Heavy build up of frost, possibly also on the door seal.
Light bulb is defective.
Door seal is not air tight (possibly after changing over the hinges).
Please look in the “Changing the Light Bulb” sections.
Carefully warm the leaking sections of the door seal with a hair dryer (not hot- ter than approx. 50 °C). At the same time shape the warmed door seal by hand such that it sits correctly.
17