Malfunction |
| Possible Cause |
| Remedy |
|
|
|
|
|
Unusual noises.
The compressor does not start immediately after changing the temperature setting.
Water on the floor or on storage shelves.
Appliance is not level.
The appliance is touching the wall or other objects.
A component, e.g. a pipe, on the rear of the appliance is touching another part of the appliance or the wall.
This normal, no error has occurred.
Water drain hole is blocked.
Readjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component out of the way.
The compressor starts after a period of time.
See the “Cleaning and Care” section.
Changing the light bulb
Warning! There is a risk of electric shocks! Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.
Light bulb data:
☞To switch off the appliance, turn the temperature regulator to positi- on "0".
☞Unplug the mains plug.
☞To change the light bulb, undo the screw.
☞Press the light bulb cover as shown
and slide it backwards.
☞ Change the defective light bulb.
☞ Refit the light bulb cover and the screw.
☞Put the refrigerator back into operati-
on.
18