14Installation
Installing the Cabinet Glides
The cabinet glides mount to the inside of the cabinet. The glides on the coffee maker slide into the cabinet glides. The guide system allows the coffee maker to slide in and out of the cabinet for loading the coffee bins and for maintenance.
To install the cabinet glides:
•Determine the number of metal shims required to mount the cabinet glide
assemblies according to the chart and diagrams below. The appliance
is supplied with six |
|
| |
Cutout Width | Number of Shims | ||
1/16” (1mm) metal | |||
shims. Use the shims | 22 1/8” (56.2cm) | 0 | |
to position the fixing | 22 3/16” (56.4cm) | 2 Total (1 on each side) | |
angles so that they are |
|
| |
22 1/4” (56.6cm) | 4 Total (2 on each side) | ||
properly spaced. The | |||
22 3/8” (56.8cm) | 6 Total (3 on each side) | ||
appliance will not slide | |||
|
| ||
in and out of the cabinet |
|
|
properly if the fixing angles are not properly spaced.
4” X 12” (100mm X 300mm) Min. |
Cabinet Back Cutout for |
Air Circulation |
3/4” (19mm) |
Min. Side Walls |
22 1/8” (562mm) Min. |
Fixing Angle 
Cabinet 
Glide
Cabinet
Glide
Asssembly