Preparing for Installation

Planning the Location

		24”
	(610mm)
	3/4”
	3/4”	(19mm)
	Min.	Side Walls
3/4” (19mm)
Level Support Platform
Optimal Water
and Electrical
and Electrical			17 7/8”
Supply Location			17 7/8”
			(454mm)

8””

(203mm)

1” (26mm)

4” X 12”

(100mm - 300mm) Ventilation Cut-Out in Cabinet Back

1” Min.

(26mm)

	22 1/8” - 22 3/8”	Steam Barrier
	(562mm - 568mm)
		(provided)

20 3/4”

(527mm)

1/8”

(3mm)

22 3/16” (564mm)

Screw 8 place

3/4” (19mm)(provided) Min. Side Walls

1” Min. (26mm)

IMPORTANT:

•All statutory regulations, local and regional codes and local power supply company connection specifications must be strictly observed.

•The supplied power cord is 60” (152.4cm) long, terminated by a three-prong plug. It is located in the lower right rear corner on the back of the unit. It must be plugged directly into a dedicated, wall-mounted electrical receptacle.

•The electrical outlet (and water shut off valve for model E24CM76GSS) should be located in an adjacent cabinet. Both must be accessible when the unit is installed.

•The coffee maker(E24CM76GSS) is supplied with a flexible water hose for connection to a 1/4” threaded water line connection. See page 12 for further information on planning the water line connection.

•The coffee maker must be installed at a safe distance from other sources of heat, such as home appliances, in order to avoid an excessive rise in temperature.

•For ventilation purposes, there must be a slot near the top of the cabinet back. The minimum dimensions are 4” X 12” (10.0 X 30.0cm).