Cuisinart EM-300 manual Special Safety, Grounding prong

SAVE THESE INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING: RISK OF FIRE OR ELECTRIC SHOCK

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the productÕs enclosure that may be of sufficient magnitude to constitute a risk of fire or electric shock to persons. The exclamation point within an

NOTE: For safety reasons it is recommended you plug your Cuisinart appliance directly into the power outlet. Use in conjunction with a power strip or extension cord is not recommended.

SPECIAL CORD SET

INSTRUCTIONS

A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

Longer extension cords are available and may be used if care is exercised in their use.

If a long extension cord is used, the marked electrical rating of the extension cord must be at least as great as the electrical rating of the appliance. The extension cord should be a grounding-type 3-wire cord, and the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over.

equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING

RISK OF FIRE OR ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY

SPECIAL SAFETY

NOTICE

If you have a die-cast metal unit, for your protection it is equipped with a 3-conductor cord set that has

a molded 3-prong grounding-type plug, and should be used in combi- nation with a properly connected grounding-type outlet as shown in Figure A.

A.

Circuit Grounding

Conductor

Connected

Properly

Grounding

Prong

B.

Adapter Grounding Lug

C.

Cover

Mounting

Screw

Cover of

Grounded

Outlet Box

INSTRUCTIONS

1.Use only cold water in the water reservoir. Do not use any other liquid.

2.Never use the machine without water in it.

3.Scalding may occur if the brewing head is opened during brewing cycle.

If a grounding-type outlet is not available, an adapter, as shown in Figure B, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug. As shown in Figure C, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. NOTE: Do not remove

the grounding prong.

3