C Inserting the Charcoal water filter
N.B. Your appliance is supplied with two charcoal water filters.
It is strongly recommended that the water filter is replaced after 90 days or 90 uses; more often if you have hard water. Failure to do so can lead to a
ßRemove the filter from its packaging and soak in cold tap water for 15 minutes.
ßTo remove the water filter holder, simply lift it out from its opening on the inner wall of the reservoir.
ßHold stem in one hand. With your other hand, gently press the compartment door down and pull outwards to flip open.
ßPlace the filter in the holder and close the compartment cover; you will hear a snap indicating filter is in place.
N.B. Caution must be used when inserting the charcoal filter. Improper placement in the holder can cause tearing of the filter skin.
ßHold the filter under cold running tap water for 10 seconds to flush. Hold the water filter holder hori- zontally, directly under the water stream so that the water flows through the filter compartment.
ßAllow the filter to drain completely.
ßReplace the water filter holder into its opening on the inner wall of the reservoir, pushing it all the way down to the base of the unit.
13