Troubleshooting
PROBLEM | CAUSE | SOLUTION |
|
|
|
|
| ||
Continuous | Bean Hopper not locked in pla- | • Check to see if the Bean Hopper release knob is in | ||
beeping | ce (when brewing with whole | the unlocked position | ||
| beans) | • Place the Bean Hopper on the unit | ||
|
| • Turn the knob to the locked position | ||
|
| • Press On/Off to resume; if programming, reset | ||
|
|
| ||
| Filter door not closed | • Check to be sure that all components of the filter | ||
|
| compartment are in place | ||
|
| • Close filter | door (you will hear a click if the door is properly | |
|
| shut) |
|
|
|
| • Press On/Off twice to resume; if programming, reset | ||
|
|
|
|
|
| Filter basket not in place | • Open filter | door by | pressing the filter door release button |
|
| • Hook filter | basket | with cover onto door |
•Close filter door (you will hear a click if the door is properly shut)
•Press On/Off twice to resume; if programming, reset
Filter basket cover not in place | • Open filter | door by | pressing the filter door release button |
| • Put on cover, matching “grind” arrows | ||
| • Hook filter | basket | with cover onto door |
•Close filter door (you will hear a click if the door is properly shut)
•Press On/Off twice to resume; if programming, reset
Filter Basket not emptied of used | • Open filter door by pressing the filter door release button | ||
grinds | • Remove filter basket | with | cover |
| • Discard used grounds |
|
|
| • Replace filter basket | with | cover and close door |
| • Press On/Off twice to resume; if programming, reset | ||
24