FOOD PROCESSOR
GETTING STARTED STEP BY STEP
Please note that the bowl with collar will fit on the base in eight different positions. The handle can be in front or on either side and the feed tube in front, back, or on either side. Directions for use reference a certain position for instructional purposes only.
FOOD PROCESSOR ASSEMBLY
CHOPPING, PURÉ EING AND MIXING
1.Hold gearbox collar in one hand and work bowl handle in the other. Twist bowl clockwise onto collar.
2.Place collar with bowl onto motor base with handle facing front.
3.Place chopping blade over shaft in work bowl. Chopping blade should slide easily to the bottom of the bowl. Lower blade will almost touch bottom of bowl.
BE SURE TO HANDLE THE METAL BLADE WITH CARE AS IT IS RAZOR SHARP!
4.Place food to be processed in work bowl. Put cover on work bowl, with feed tube at about 11 o’clock. Turn the cover clockwise until it fits into position. Cover lock must click into locked position prior to use. If you have trouble fitting the cover on the work bowl, turn chopping blade hub slightly and replace cover.
5.The food pusher fits in feed tube with more rounded side toward the outside of the bowl. ALWAYS USE PUSHER TO GUIDE
FOOD THROUGH FEED TUBE. NEVER USE YOUR FINGERS OR SPATULA.
6.Plug your SmartPower Premier Duet™
to provide unit stability. If the machine doesn’t start, make sure it is plugged in and the work bowl and cover are locked into place. The food processor will not start until the collar, work bowl and work bowl lid are locked into place. Nevertheless, always unplug the unit before placing hands into the food processor bowl.
NOTE: The motor base will start, but the food processor blade will not turn until assembled properly.
The reversible slicing/shredding disc can slice and shred a variety of fruits and vegetables, meats and cheeses. See Quick Reference guide for Preparing Foods for Slicing and Shredding, page 13.
FOOD PROCESSOR ASSEMBLY
SLICING AND SHREDDING
1.Hold collar in one hand and bowl handle in the other. Twist bowl clockwise onto collar.
2.Place collar with bowl onto motor base with handle facing front.
3.Place adapter stem onto the center shaft. To slice: Attach disc to
stem with the raised edge of slicer on top. To shred: Attach disc to stem with the raised shredding slots on top. Place the slicing/shredding disc onto shaft with the desired cutting blade facing up. Be sure to handle the metal blade with care, as it is razor sharp.
4.Place cover on work bowl, with feed tube at about 11 o’clock. Turn cover clockwise until it fits into position. Insert food in feed tube.
5.Hold pusher with more rounded side toward the outside of the bowl and insert it in feed tube over food. Always use pusher to guide food through feed tube. Never use your fingers or spatula.
6.Plug your Cuisinart® SmartPower Premier Duet™
7.To remove cover, unlock it by turning it counterclockwise, then lift it straight up.
OPERATING CONTROLS
Your SmartPower Premier Duet™ appliance uses the high speed with the Food Processor attachment. This button is the perfect speed for all your food processing tasks. Always use this speed when using the food processor. You may also use the Pulse button set on High with this function for
To use your food processor, make sure that the bowl is assembled properly and the blade or slicing/shredding disc and the cover are locked into place.
When you use the control panel, the LED will light next to each button you press.
9