Viking VGSC manual General Information Installation, Moving, Handling, and Unpacking

Page 7

General Information

Installation

NOTICE

READ AND FOLLOW ALL WARNING AND CAUTION INFORMATION WHEN INSTALLING THIS APPLIANCE.

All openings in the wall behind the appliance and in the floor under the appliance must be sealed.

Do not obstruct the flow of combustion and ventilation air.

Moving, Handling, and Unpacking

Remove and discard all packing materials, including cardboard and tape on the outside and inside of the range.

Remove the burner grates and styrofoam off the top cooking surface. Be sure to remove the burner caps packaged in styrofoam below the burner grates.

Do not discard the anti-tip metal bracket supplied with the range. This is the anti-tip device and must be installed with the unit. Refer to

“Anti-tip Device Installation” section.

Some stainless steel parts may have a plastic protective wrap which must be peeled off. The interior should be washed thoroughly with hot, soapy water to remove film residues and any dust or debris before being used, then rinsed and wiped dry. Solutions stronger than soap and water are rarely needed.

DO NOT use the handle or oven door to lift the oven. Remove door before installation to ensure that it is not used to lift the unit. DO NOT lift or carry the door by the handle.

Removing the door must be done by your dealer, a qualified licensed plumber, or certified gas installer.

Door Removal

 

1

2

Open door completely. Place pins, supplied with unit, in

Remove hinge trim screws. Take off hinge trim. Identify

pin hole. For personal safety, ONLY use pins

right and left hinge for future re-installation.

supplied with the unit.

 

3

4

Close until pins stop door.

Lift door up and out.

12

13

Image 7
Contents Viking Installation Guide Table of Contents Electrical Shock Hazard Specifications DimensionsBurn hazard Electrical Requirements Electrical & Gas RequirementsMoving, Handling, and Unpacking General Information InstallationLeveling/Adjustments/Alignment Leg InstallationConnecting Gas & Electric Leveling/Adjustments/Alignments Anti-tip Device InstallationDoor Replacement and Adjustment Standoff Bracket Removal Vgsc Self-Clean Models OnlyPerformance Checklist Final Preparation Service & Registration

VGSC specifications

Viking VGSC, or Viking Commercial Marine System, is an advanced marine technology platform specifically designed for modern vessels, focusing on performance, safety, and sustainability. As marine operations become increasingly complex and demanding, Viking VGSC stands out as a comprehensive solution that integrates cutting-edge technologies with user-centric features.

One of the defining characteristics of Viking VGSC is its holistic approach to vessel management. This platform combines various systems including navigation, communication, and monitoring, all seamlessly interlinked. The main feature of Viking VGSC is its sophisticated navigation system, which utilizes GNSS technology. This ensures precise positioning and enhances situational awareness in a variety of maritime environments. The inclusion of real-time weather data and integrated route planning capabilities further optimizes navigation by allowing operators to make informed decisions swiftly.

Another essential element of Viking VGSC is its robust communication system. It offers state-of-the-art satellite and radio communication solutions, enabling vessels to maintain connectivity regardless of distance from shore. This feature is particularly vital for safety, as it allows for constant communication with other vessels and maritime authorities, ensuring prompt responses in case of emergencies.

Viking VGSC also emphasizes safety with multiple integrated monitoring systems. These systems track critical vessel parameters, such as engine performance, fuel consumption, and environmental impact, providing crews with essential data to improve operational efficiency. In addition, the platform supports predictive maintenance technology, which can forecast potential equipment failures and schedule maintenance proactively, minimizing downtime.

One of the standout technological advancements in Viking VGSC is its commitment to sustainability. The platform is designed to optimize energy consumption and reduce emissions, aligning with the increasing regulations aimed at protecting marine environments. Advanced data analytics enable operators to monitor and minimize fuel consumption, contributing to both cost savings and environmental stewardship.

In summary, Viking VGSC is a state-of-the-art marine technology platform that enhances vessel performance through an integrated approach to navigation, communication, and monitoring. Its focus on safety, efficiency, and sustainability makes it an essential tool for modern maritime operations, ensuring that vessels are not only effective but also responsible in their environmental impact. With its advanced features and technologies, Viking VGSC is set to redefine the standards of marine vessel management.