Viking VGSC Standoff Bracket Removal Vgsc Self-Clean Models Only, Door Replacement and Adjustment

Page 10

Standoff Bracket Removal (VGSC Self-Clean Models Only)

Note: Standoff brackets can only be removed if range is installed against a NON-COMBUSTIBLE wall.

1

DANGER

FIRE HAZARD Standoff brackets provide a 3/8” barrier between back of range and rear wall. These

must be in place for adequete ventilation. The standoff brackets may only be removed if range is installed against a non-combustible wall.

 

Unscrew four standoff brackets and remove.

Final Installation

 

1

2

Door Replacement and Adjustment

1

2

Reattach door to range.

Open door completely. Reattach hinge trim.

3

4

Install backguard.

Remove pins from hole in hinges.

Slide range into place. Be sure

anit-tip bracket slides into the anit-tip opening.

Close door.

3

4

5

Burner caps are packed in styrofoam top pack with the grates. Place burner on top of range. Place burner grate on top of burner cap and grate support.

Note: Arrow on burner cap must be pointing towards back of range.

3/

8

)

 

cm

 

 

 

 

(0.

95

 

 

 

 

 

 

 

 

Check that unit is level side to side

 

 

 

 

If the door needs to be adjusted, loosen hinge trim screws located in

and front to back. The side trim must be 3/8” (0.95 cm)

step 2. Adjust the screws located between the door and kickplate using a

above countertop. If unit is not level repeat steps 5-7

 

5/32” hex head allen wrench. After adjustment, tighten hinge trim screws.

of “Leveling/Adjustments/Alignment” section.

 

 

 

18

19

Image 10
Contents Viking Installation Guide Table of Contents Electrical Shock Hazard Dimensions SpecificationsBurn hazard Electrical & Gas Requirements Electrical RequirementsGeneral Information Installation Moving, Handling, and UnpackingLeg Installation Leveling/Adjustments/AlignmentLeveling/Adjustments/Alignments Anti-tip Device Installation Connecting Gas & ElectricStandoff Bracket Removal Vgsc Self-Clean Models Only Door Replacement and AdjustmentFinal Preparation Service & Registration Performance Checklist

VGSC specifications

Viking VGSC, or Viking Commercial Marine System, is an advanced marine technology platform specifically designed for modern vessels, focusing on performance, safety, and sustainability. As marine operations become increasingly complex and demanding, Viking VGSC stands out as a comprehensive solution that integrates cutting-edge technologies with user-centric features.

One of the defining characteristics of Viking VGSC is its holistic approach to vessel management. This platform combines various systems including navigation, communication, and monitoring, all seamlessly interlinked. The main feature of Viking VGSC is its sophisticated navigation system, which utilizes GNSS technology. This ensures precise positioning and enhances situational awareness in a variety of maritime environments. The inclusion of real-time weather data and integrated route planning capabilities further optimizes navigation by allowing operators to make informed decisions swiftly.

Another essential element of Viking VGSC is its robust communication system. It offers state-of-the-art satellite and radio communication solutions, enabling vessels to maintain connectivity regardless of distance from shore. This feature is particularly vital for safety, as it allows for constant communication with other vessels and maritime authorities, ensuring prompt responses in case of emergencies.

Viking VGSC also emphasizes safety with multiple integrated monitoring systems. These systems track critical vessel parameters, such as engine performance, fuel consumption, and environmental impact, providing crews with essential data to improve operational efficiency. In addition, the platform supports predictive maintenance technology, which can forecast potential equipment failures and schedule maintenance proactively, minimizing downtime.

One of the standout technological advancements in Viking VGSC is its commitment to sustainability. The platform is designed to optimize energy consumption and reduce emissions, aligning with the increasing regulations aimed at protecting marine environments. Advanced data analytics enable operators to monitor and minimize fuel consumption, contributing to both cost savings and environmental stewardship.

In summary, Viking VGSC is a state-of-the-art marine technology platform that enhances vessel performance through an integrated approach to navigation, communication, and monitoring. Its focus on safety, efficiency, and sustainability makes it an essential tool for modern maritime operations, ensuring that vessels are not only effective but also responsible in their environmental impact. With its advanced features and technologies, Viking VGSC is set to redefine the standards of marine vessel management.