Features and Benefits, USE and Care, Operation

FEATURES AND BENEFITS

1. Cover
Just press on. Tightfitting seal	3	2
resists leakage.		1

2. 2-oz. (60 g) Measured Pour Lid

Allows you to measure and add ingredients without removing the cover.

8b. Ice Crush Button

This button is preset to the best speed for crushed ice.

9.Slip-proof Feet

Prevent movement during use and prevent damaging marks on countertops or tables.

10.Cord Storage (not shown)

Keeps countertop safe and neat by storing excess cord conveniently.

USE AND CARE

	QUICK REFERENCE GUIDE
To activate blender	Press “On” – The blender is in on mode
To begin blending	Press desired speed button
To change speeds	Press desired speed button
To pulse	In “On” mode press “Pulse”, then press
	and release desired speed button
	as needed

during blending by simply lifting the measured pour lid, adding ingredients, and replacing the measured pour lid.

• Cover should always be in place while the unit is on.

• Warning: Do not place blender jar onto base while motor is running.

• Do not twist locking ring off blender jar when removing blender jar

from base. Simply lift blender jar from motor base.

• Boiling liquid or solid frozen foods (with the exception of ice cubes

or ½-inch [1.25 cm] pieces of frozen fruit) should never be placed in

3.60-oz. (1.8 L) Glass Jar with Pour Spout

Has a unique, sturdy, widemouth design and a pour spout.

4.Leak-proof Rubber Gasket

	(not shown)
	Holds the glass jar snugly in	8
	position for safe operation.	8
	position for safe operation.

ASSEMBLY

To use your Cuisinart® Supreme Super 600™ Blender, begin by assembling the blender jar.

1.Turn the blender jar (a) upside down, and place it flat on a sturdy surface.

2.Position the rubber gasket (b) on the round opening on the bottom of the blender jar.

(d)

(c)

(b)

To crush ice	In “On” mode, press and release
	“Ice Crush” button as needed.
To stop blending	Press “Off” button.
(and deactivate blender)
To stop blending	Release button.
(in pulse or ice crush mode)
To stop blending (in chop, mix	Press speed button again. This will return
purée or liquefy mode)	the blender to “On” mode. Press “Off”

the blender jar.

• Do not place ice, frozen foods or very cold liquids into a blender jar

which has come directly from a hot dishwasher.

• Do not place very hot liquids or foods into a blender jar which has

come directly from the freezer. Boiling liquids should cool for

5 minutes before being placed in blender jar.

• Follow Cleaning and Maintenance instructions on page 6 prior to

your first use.

5. High-quality Cutting Assembly

with Patented Stainless 7

Steel Blades

Is strong enough for all blender tasks, including tough jobs, from ice crushing to chopping delicate herbs.

6. Locking Ring

Note: Blades are sharp...

handle carefully.

3. Turn the cutting assembly (c) upside down, (a) and place the blade end in the blender jar opening.

Note: Blades are sharp... handle carefully.

4. Secure the rubber gasket and cutting

assembly into position by placing the smaller opening of the locking

ring (d) on top of the cutting assembly. Engage threads by twisting

the locking ring clockwise until tightened. Make sure locking ring is

button to turn blender off.

SPEED SELECTION GUIDE

Refer to this guide to choose the best speed for your desired result.

Ingredient	Speed	Result
Nuts	Chop	Coarse to fine
Whipping cream	Mix	Thick topping

OPERATION

1. Place the motor base of your Cuisinart® Supreme Super 600™

Blender onto a flat, sturdy surface. It is important that the surface

be clean and dry. Assemble the blender by following the assembly

instructions. Once the jar is assembled and is in position on the

motor base, plug the blender into an electrical outlet.

Is self-aligning so that the glass blender jar screws easily into position.

7.Heavy-duty Motor Base

Is so sturdy and stable, it will not “walk” on your counter – even during ice crushing!

8.Preprogrammed 6-Speed Push-button Controls

Is easy to use, read and clean. The red LED lights clearly indicate what blender speed you are using.

8a. Pulse at Any Speed Button

Allows you to pulse at any speed from high to low, so you can blend ingredients only as much as needed.

	tightly fastened to blender jar. Once assembled, turn the blender jar
	right side up. Note: Never place blade assembly on base unless
	assembled to jar.
5.	Push the cover onto the top of the blender jar. Push the measured
	pour lid into the cover.
6.	Place the blender jar on the motor base so that the jar markings are
	facing you and the handle is positioned to one side.
7. Plug in power cord. Your blender is now ready to be used.

HELPFUL REMINDERS

•Once the cover is in position, additional ingredients can be added

Bread crumbs	Mix	Uniformly fine
Grating citrus zest	Purée	Uniformly fine
Milk Shakes	Purée	Smooth and creamy
Baby food	Purée	Smooth and creamy
Health drinks	Liquefy	Smooth and creamy
Frozen cocktails	Liquefy	Thick and slushy
Grinding hard cheese	Liquefy	Coarse to fine
Spices	Liquefy	Coarse to fine
Ice	Ice Crush	Snowy

2. Add all necessary ingredients to the blender jar, and replace the

cover. You may add more ingredients by lifting the measured pour

lid and dropping ingredients through the fill area. Replace the

measured pour lid after adding ingredients. Do not place hands

into blender jar with blender plugged in.

Note: Add liquid ingredients first, then follow with solid ingredients. This will provide more consistent blending and prevent unnecessary stress on the motor.