Replacing Light Bulbs, Service Information

If necessary to scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel. Every three months give your hood a thorough cleaning. On painted surfaces, use a new coat of wax. A good wax cleaner, available at either a grocery or hardware store will do both jobs at once. On stainless steel surfaces, use a good stainless steel cleaner and polish.

Renewing the Enamel Finish

If discoloration occurs, you should thoroughly polish the finish on your hood to renew its gloss and luster and to remove any grease residue which may have a yellowing effect. Use any good enamel polish, refrigerator polish, or automotive polish. CAUTION: Do not use a porcelain cleaner or rough abrasive cleaner.

Renewing the Stainless Steel Finish

Regular cleaning is the best way to assure that your stainless steel finish stays bright and unscratched. Use lemon oil or stainless steel polish to coat and protect stainless steel.

Brass Parts

Caution: All brass special ordered parts are coated with an epoxy coating. Do not use brass cleaners or abrasive cleansers on the brass option parts. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.

Cleaning Ductless Venting Chamber

1.Remove the middle vent by gently raising up and pulling out.

2.Use the same cleaning directions as stated in “Cleaning the Hood Canopy”.

3.After cleaning, replace the middle vent.

Replacing Light Bulbs

Halogen Lights

Use an oven mitt during bulb removal to protect your hand in case the bulb breaks.

1)Unscrew halogen bulb.

2)Replace the bulb with a 120 volt, 50-watt halogen bulb.

Infrared Heat Lamp

Use an oven mitt during bulb removal to protect your hand in case the bulb breaks.

1)Unscrew infrared bulb from heat lamp socket.

2)Replace the bulb with an R40, 120 volt, 250-watt infrared bulb.

Service Information

If your hood should fail to operate check to see if the the circuit breaker is open, or if a fuse is blown?

If service is required:

1.Call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area.

2.Have the following information readily available:

a.Model number

b.Serial number

c.Date purchased

d.Name of dealer from whom purchased

3.Clearly describe the problem that you are having.

If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range Corporation at (601) 451-4133 or write to:

VIKING RANGE CORPORATION

PREFERRED SERVICE

111 Front Street

Greenwood, Mississippi (MS) 38930 USA

Record the information indicated below. You will need it if service is ever required. The model and serial number for your hood is located behind the baffle filter on the left side panel in the lower right corner.


Model Number					Serial Number
Date of Purchase					Date Installed
Dealer’s Name
Address
Address

If service requires installation of parts, use only authorized parts to ensure protection under the warranty.

THIS MANUAL SHOULD REMAIN WITH THE HOOD FOR

FUTURE REFERENCE

F1570F specifications

The Viking F1570F is a modern agricultural powerhouse designed to meet the demanding needs of today’s farmers. This robust and versatile tractor is engineered for efficient performance across various agricultural tasks, from plowing and tilling to planting and harvesting.

One of the standout features of the Viking F1570F is its powerful engine. The tractor is equipped with a high-capacity diesel engine that provides excellent torque and horsepower, making it capable of handling even the most challenging farming tasks. The engine is designed for optimal fuel efficiency, allowing farmers to save on operating costs while also minimizing their environmental footprint.

The transmission system on the F1570F is designed for smooth operation and ease of use. It features a hydrostatic transmission that allows for seamless speed adjustments, enabling operators to navigate through fields with precision and control. This technology enhances maneuverability, particularly in tight spaces or when working with sensitive crops.

In terms of comfort and control, the Viking F1570F comes with an ergonomic cabin that enhances the operator’s experience during long working hours. The cabin is designed to provide excellent visibility, reducing blind spots and improving safety on the job. It is equipped with climate control features to ensure a comfortable working environment regardless of outdoor weather conditions.

The tractor’s advanced hydraulic system is another notable characteristic, providing powerful lifting capabilities for various implements and attachments. Farmers can easily switch between tasks, whether it’s lifting heavy loads or powering precision implements, thanks to its robust hydraulic design.

Furthermore, the Viking F1570F incorporates modern technological advancements. The integration of GPS technology offers precision farming solutions, enabling farmers to achieve better crop yields while reducing waste. This technology allows for accurate mapping and tracking of field operations, ensuring that every inch of arable land is effectively utilized.

Additionally, the F1570F is designed with durability in mind. The chassis and components are built to withstand the rigors of regular use, ensuring longevity and reliability on the farm. This robust construction minimizes downtime, allowing farmers to focus on productivity.

Overall, the Viking F1570F stands out as a reliable, powerful, and technologically advanced tractor that can significantly enhance agricultural productivity. Its blend of performance, comfort, and advanced features makes it an ideal choice for modern farming operations, providing both efficiency and effectiveness in the field.