Viking F20631E manual Preparing Dishes, Changing a Program

Page 8

Operation

Preparing Dishes

It is not necessary to rinse normal food soils off the dishes before putting them in the dishwasher, although larger solid particles, such as bones, seeds, skins, pits, and toothpicks should be removed.

If you are not going to run the dishwasher immediately after loading, it is best to rinse salty and highly acidic foods off stainless steel, silver, and silverplate flatware. Prolonged contact of foods—including lemon juice, salt, vinegar, mustard, mayonnaise, and salad dressings—with stainless steel can cause corrosion (pitting).

Before Operation

1.Load the dishes per recommended loading. See section on Loading Dishwasher.

2.Make sure there is rinse agent in the dispenser. Add rinse agent if needed. See section on Rinse Agent.

3.Add proper amount of detergent and pre-wash. See section on Dishwasher Detergent.

4.Push both top and bottom racks in.

5.Select the desired cycle and option(s).

6.Press “START”. The “START” symbol will illuminate to indicate the unit is ready.

7.Close the door tightly until you hear a click. Otherwise, the dishwasher will not start.

Option Restrictions

All options are not available for all cycles. Please note the following:

•The option “155º F (68° C) FINAL RINSE” is not available in the “LIGHT/CHINA” cycle.

•No options are available in the “RINSE/HOLD” cycle.

After selecting the wash cycle and options, depress “START” button. The start symbol will illuminate. This merely means the machine is ready. Close the door securely within 4 seconds of pressing the “START” button.

Changing a Program

Changing a Program After the Unit has Started

The dishwasher is programmed to stop operating if the door is opened during a cycle. To change a program or option after starting the machine, open the door slightly to let the spray arms stop rotating and avoid getting sprayed with water. Press and hold “START” for four seconds to cancel the current selection, then press the touchpad(s) for your desired selection.

Press “START” again and close the door. The drain pump will run to remove any dirty water from the dishwasher before starting the newly selected cycle. Check to make sure there is still detergent in the detergent dispenser.

Opening the Door after Cycle has Started

If the door is opened after the cycle has started, the ”START” button will flash to indicate that the dishwasher is in Standby Mode. Press the “START” button and close door securely within 4 seconds to restart the cycle.

Operation

14

15

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Viking Use & Care Manual Congratulations Table of Contents Important Safety InstructionsImportant Safety Instructions Features Features Cycle Data ModelFeatures Cycles Preparing Dishes Changing a ProgramWashing Recommendations CommentsRack Adjustments Loading the DishwasherLoading Silverware Basket Silverware/Cutlery BasketDishwasher Detergent Storing the DetergentWash Temperature Power On LightRinse Agent Energy Saving TipsMaintenance Water HardnessPoor Dishwashing Results Maintenance TroubleshootingTo Clean Filters Problem Possiblecause AND/OR Remedy Care Flash Fault Action Pan Flood Sensor Disconnect Service Information Warranty One Year Full WarrantyFive Year Limited Warranty Motor/Pump and Water DistributionIfetimeL Limited Warranty Ninety 90 Dayresidential Plus Warranty

F20631E specifications

The Viking F20631E is a remarkable light aircraft, specifically designed to balance performance with comfort, making it an excellent choice for both recreational pilots and serious aviators. As part of Viking's renowned line of aircraft, the F20631E showcases a blend of traditional design principles and contemporary technologies that enhance safety and efficiency.

One of the standout features of the Viking F20631E is its robust airframe, built from advanced materials that ensure durability while minimizing weight. This design contributes to improved fuel efficiency and excellent handling characteristics, critical for both short trips and longer excursions. The aircraft operates with a maximum takeoff weight of 2,600 pounds, allowing for a considerable payload capacity, ideal for carrying passengers or cargo.

The F20631E is powered by a dependable engine, specifically designed to deliver reliable performance across various altitudes and conditions. With a powerful, fuel-efficient engine, the aircraft can soar to cruising altitudes of around 10,000 feet, offering faster travel times and a more comfortable flying experience. In addition, the impressive climb rate means the aircraft can achieve altitude quickly, enhancing its performance during takeoff and ascent.

One of the most notable technologies integrated into the F20631E is its advanced avionics system. Featuring a state-of-the-art glass cockpit, pilots benefit from an intuitive layout that provides vital flight data at a glance. This modern system includes multifunction displays, GPS navigation, and autopilot capabilities, which not only improve the overall flying experience but also increase safety margins by reducing pilot workload.

Comfort is also a significant consideration in the design of the F20631E. The cabin is spacious, accommodating up to six passengers, with ergonomic seating and large windows that create a pleasant environment. The thoughtful layout ensures that passengers can enjoy a comfortable flight, making it suitable for longer journeys.

In summary, the Viking F20631E encapsulates a balance of innovative technologies and classic design, resulting in an aircraft that excels in performance, safety, and comfort. With its advanced avionics, efficient power system, and comfortable cabin, it presents an enticing option for both personal and business aviation, appealing to a wide range of flying enthusiasts. This aircraft stands as a testament to Viking's commitment to delivering quality and reliability in aviation.
Top Page Image Contents