Viking F20945B manual Convection Dehydrate/Defrost, Cleaning and Maintenance

Page 22

Operation

Convection Dehydrate/Defrost

Convection Dehydrate

This oven is designed not only to cook, but also to dehydrate fruits and vegetables.

1.Prepare the food as recommended.

2.Arrange the food on drying racks (not included with the oven; contact a local store handling speciality cooking utensils).

3.Set the appropriate low temperature and turn the selector to “TRU CONV”.

CAUTION

You must carefully check the food during the dehydration process to ensure that it does not catch fire.

Convection Defrost

1.Place the frozenfood on a bakingsheet.

2.Set the temperaturecontrolto “OFF”.

3.Turn the selector to “TRU CONV”.

WARNING

To avoid sickness and food waste, DO NOT allow defrosted food to remain in the oven for more than 2 hours.

WARNING

DO NOT turn the Temperature Control on during defrosting. Turning the convection fan on will accelerate the natural defrosting of the food without the heat.

Cleaning and Maintenance

Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no exception. Your oven must be kept clean and maintained properly.

Oven Surfaces

Several different finishes have been used in your electric oven. Cleaning instructions for each surface are given below. Your oven features a Self-Clean cycle for the oven interior. See “Self-Clean Cycle” for complete instructions. NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE POWDERS. THEY CAN PERMANENTLY DAMAGE

YOUR OVEN.

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem.

Stainless Steel Parts

Some stainless steel parts may have a protective wrap, which must be peeled off. All stainless steel body parts should be wiped regularly with hot, soapy water at the end of each cooling period and with liquid cleaner designed for this material when soapy water will not do the job. If build-up occurs, DO NOT use steel wool, or abrasive cloths, cleaners, or powders. If it is necessary to scrape stainless steel surface to remove encrusted material, soak area with hot, wet towels to loosen the material, then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless steel surfaces. Scratches are almost impossible to remove.

Product Care

42

43

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Use & Care Table of Contents CongratulationsRecognize Safety Symbols, Words, Labels Keep These Instructions for Future ReferenceTo Prevent Fire or Smoke Damage Electrical Shock Hazard Burn Hazard Setting the Clock Before Using OvenOven Oven Functions and Settings Oven Control PanelTo program the Min/Sec Timer Oven FeaturesSetting the Min/Sec Timer Electronic Timing CenterSetting the Automatic Start Time Bake Program Clocks and TimersTimer Alarm To Set The Automatic Time Bake ProgramFunctions and Settings Meat Probe Function Using the OvenPreheat To Set the Automatic Probe FunctionConventional and Convection Cooking Pan Placement Tips CondensationTRU Conv TruConvec BakingBake Two-Element Bake Baking TipsBaking Chart Convection Baking ChartRoasting Solving Baking ProblemsCommon Baking Problems/Remedies Roasting TipsOperation Conventional Roasting Chart Convection Roasting ChartBroiling Instructions BroilingConv Broil Convection Broil To Use Broil or Convection BroilBroiling Chart Broiling TipsCleaning and Maintenance Convection Dehydrate/DefrostBroiler Pan and Grid Self-Clean CycleBefore starting the Self-Clean cycle Oven RacksPower Failure To start the Self-Clean cycleTo stop the Self-Clean cycle Replacing Oven LightsTroubleshooting Service InformationWarranty BUILT-IN Electric Ovens Warranty Three Year Full Warranty
Top Page Image Contents