Viking F20495 manual Leg Installation Electrical Connection 3-wire, Not secure for long transit

Page 8

Leg Installation

1

2

Electrical Connection (3-wire)

Note: If you have a 4-wire connection, see following section for 4-wire connection instructions.

 

1

 

1

 

3

 

2

Legs are packed in styrofoam top pack.

Note: It is strongly recommended

Note: Legs should be installed near to where

that a pallet or lift jack be used rather than tilting.

appliance is to be used, as they are

Raise unit about a foot. Unscrew temporary legs from

not secure for long transit.

couplings on all four corners.

3

4

Screw legs into couplings on all

Lower range gently to keep any undue strain from

four corners.

legs and internal mounting hardware.

WARNING

Electrical shock hazard.

To avoid risk or electrical

shock, personal injury or death; grounding product to the frame

of the unit may or may not be permitted through your local codes. If ground to the frame is not permitted then a 4 conductor power cord must be used.

Use a 3-wire power supply cord kit rated for 40 amps – 125/250 volts with closed loop terminals and marked for use with ranges.

Do not use a GFI circuit. Where local codes do not permit grounding through neutral, use a 4-wire power supply cord. The cord or conduit must be secured to the range with the strain relief bracket.

The electrical connection is made at the terminal block, which is located behind the access door on the back of the range.

WARNING

Electrical shock hazard. To avoid risk of electrical shock,

personal injury or death; verify your appliance has been

properly grounded in accordance with local codes or in absence of codes, with the National Electrical Code (NEC). ANSI/NFPA 70-latest edition.

1

Remove access door.

2

3

 

 

 

 

Remove supply cord strain relief

Feed supply cord up through hole in bottom

bracket and three supply cord mounting screws

of range back.

on terminal block.

 

14

15

Image 8
Contents Viking Installation Guide Table of Contents Fire/explosionhazard Chemical hazardTipping hazard Gas leak hazardDimensions SpecificationsBurn hazard Electrical & Gas Requirements Electrical shock hazardGeneral Information Installation Moving, Handling, and UnpackingLeg Installation Electrical Connection 3-wire Not secure for long transitElectrical Connection 3-wire Electrical Connection 4-wire Leveling/Adjustments/Alignment Leveling/Adjustments/Alignments Anti-tip Device Installation Connecting Gas & ElectricFinal Installation Door Replacement and AdjustmentFinal Preparation Service & Registration Performance Checklist

F20495 specifications

Viking F20495 is a remarkable entry in the realm of high-performance marine vessels, designed to cater to the needs of both commercial and recreational users. As a robust and versatile boat, it exemplifies the perfect blend of traditional craftsmanship and modern technology, making it an ideal choice for various marine activities.

One of the standout features of the Viking F20495 is its sturdy construction. Built with a high-quality fiberglass hull, it ensures durability and longevity while maintaining a lightweight profile. This construction method not only enhances performance on the water but also minimizes maintenance concerns, allowing users to focus on their adventures rather than repairs.

In terms of size, the F20495 measures an impressive 20 feet in length, providing ample space for passengers and gear. The design incorporates a spacious cockpit, ideal for fishing, leisure activities, or social gatherings. Its ergonomic layout ensures comfort and ease of movement, integral for those long jaunts at sea.

Equipped with advanced propulsion technology, the Viking F20495 can feature a powerful outboard engine that delivers exceptional speed and fuel efficiency. This engine configuration allows for improved maneuverability, essential for navigating both calm waters and challenging conditions.

The vessel is also designed with safety in mind. Features such as a deep V-hull provide stability and reduce the risk of capsizing, while high-quality railings and non-slip surfaces promote secure movement around the deck. Additionally, the inclusion of state-of-the-art navigation and communication systems ensures that users can maintain contact with shore and navigate with confidence, even in unfamiliar territories.

Interior features abound in the Viking F20495, with comfortable seating and ample storage designed to enhance the overall user experience. Cabin facilities are often included, offering shelter from the elements and making overnight trips more enjoyable.

In summary, Viking F20495 stands out as a high-performance vessel that offers a perfect combination of style, technology, and practicality. With its robust construction, powerful engine options, and user-friendly design, it caters to both novice and experienced marine enthusiasts alike, making it a superb choice for anyone looking to explore the waterways.